Killer B Motorsport

Sort By:  
Killer B high flow water pump housing- Subaru Models (incl. 02-14 WRX, 02-18STI, 92-97 SVX) (WPH)

DESCRIPTION

*This product is made to order so there will be a slight delay before item is shipped to you*

Killer B’s Water Pump Housing is a much more robust design. Designed using state of the art 3-D CAD software to assure maximum flow with minimum turbulence for the best performance possible!

· 3D CAD designed 
· CNC Machined Flange 
· Made Entirely from 304 Stainless Steel 
· Smooth Taper Inlet for Turbulence Free Flow 
· Roll Formed Bead Assures Proper Hose Connection 
· Hand TIG Welded 
· Large Smooth Bend Transitions into the Housing with Maximum even Flow 
· Ground Flange for a Leak Free Install

Vehicle Fitment2004-2018 STi, 2002-2014 WRX, 2004-2013 Forester XT, 2004-2009 Outback XT, 2004-2009 Legacy GT, 92-97 SVX
$199.00
Killer B Motorsports High Performance Oil Pan, EJ Series (EJ25Pan)

Product description


Our V4 Performance Oil pan is designed to reliably meet the demands of high performance Subaru Engines used on street or track applications.

This Oil Pan holds an extra 1.4 quarts of oil, a +30% increase in capacity over OEM, and was designed to work with our Ultimate Oil Pickup (OEM ones are known to break), but can be modified to work with the OEM pickup.

Read this blog post about Subaru Oil Pans: http://www.killerbmotorsport.net/blog/oilpanidentifier/

  • 3D CAD Designed 
  • Advanced Casting Process 
  • Precision machining and heat treatment 
  • Laser cut and Tig welded baffle 
  • (1) OEM Port & (1) 1/2” NPT Port (Plugs or Adapters Required) 
  • Comes with ALL Mounting Hardware 
  • All Pans Fit and Leak Tested 
  • No Moving Parts 
  • Fits Most Headers 
  • Over 30% Increase in Capacity 
  • Streamlined Flow-Through Baffles 
  • Powder Coat Finish Available 
  • Retains OEM Dipstick Fits All Impreza 2002-2013, Forester 2004-2008, Legacy 2004-2009

For installation instructions click here

Install video located at https://www.youtube.com/watch?v=wXALM7jsUPY


SKUdEJ25Pan
Vehicle Fitment2004-2018 STi, 2002-2014 WRX, 2004-2013 Forester XT, 2004-2009 Outback XT, 2004-2009 Legacy GT
Standard ColorRaw
Part NumberEJ25Pan
$513.00
Killer B Motorsports Ultimate Oil Pickup Subaru EJ20 (050)

Product Description

We have all heard the horror stories. You’re just driving down the road minding your own business and then boom your engine blows without warning.

This ULTIMATE OIL PICKUP uses a .12” thick double bracket, 3X OEM oil pickup tube thickness and a brace between bracket and oil pickup tube to further strengthen the assembly. This is a super duty, engineered solution. No other vendor has anything this rugged available, although I’m sure it will be copied.

For OEM "Flat Bottom" Oil Pan

  • 3D CAD Designed and Track tested 
  • All CNC Manufacturing Processes 
  • Digitally Pulsed TIG Welding throughout 
  • 3X Thicker Tubing, 1/8” Thick Bracket 
  • Smooth Mandrel Bend Increases Oil Flow 
  • New O-Ring Provided 
  • Fits ALL turbo EJ20 Motors (with EJ20 OEM “Flat Bottom” “Single Scroll” Oil Pan) 
  • OEM Spec. High Flow Screen Filter 
  • Lifetime Warranty"

For installation instructions click here

SKUd050
Vehicle Fitment2002-2005 WRX, 2004 Forester Please contact us for other models.
Part Number050
$187.00
Killer B Motorsports Ultimate Oil Pickup Subaru EJ25 (070-110)

Product Description


We have all heard the horror stories. You’re just driving down the road minding your own business and then boom your engine blows without warning.

This ULTIMATE OIL PICKUP uses a .12” thick double bracket, 3X OEM oil pickup tube thickness and a brace between bracket and oil pickup tube to further strengthen the assembly. This is a super duty, engineered solution. No other vendor has anything this rugged available, although I’m sure it will be copied.

Read these blog articles about our oil pickup! Click here.

$179.00
Killer B Motorsports Ultimate Oil Pickup Subaru FA20 WRX (10015OP)

Product Description


The OEM pickup screen is crimped in a retainer and that assembly is spot welded into the pickup ‘can’. There are a couple of flaws with this process. One is that the screen is creased where the retaining ring is crimped over it. The other is the spot weld process embrittles the screen. We pushed on the screen of new OEM pickups, and several popped wire strands, without a lot of effort.

Being known for making the best Subaru Performance Oiling Products money can buy, addressing this was right up our alley. Of course, our own spin of improvements, besides the obvious had to be made to assure set it and forget reliability that comes with our products. A means for improving performance was taken advantage of during the design process as well.

The obvious big change is the tube has no bend. No bend means no restriction, and even better coming from the OEM tube because it uses a more restrictive pinch bend. The ID of the tube has been increased, and so has the thickness. The angle of the tube points it directly at the inlet into the block. Like our EJ engine Ultimate Oil Pickup this one too uses a screen to match the OEM spec opening size of the mesh. Although, we use a higher strength screen material. The screen area has been increased over 31% which reduces the restriction and stress on the screen. Our screen is lightly pressed and welded into place assuring the wire does not gets stresses or heat damages. TIG welding throughout assures proper weld penetration and quality. The material is 4130 Alloy Steel to further provide an increase in strength over the brazed stamped steel OEM version. The units have been pressure tested to 150psi over the face of the screen without issue.

You can read more here on NASIOC.

Killer B Motorsport has many years of being at the forefront of Subaru Oiling system performance. Improvements have been made to the oil pickup design to improve the oil flow characteristics and addresses the screen design to eliminate the process that causes screen failure with the OEM units. 

• Tube features larger inside diameter and thicker wall for increased flow capacity and strength.
• No bends provide maximum flow potential (OEM unit uses a restrictive punch bend).
• Screen flow area increased by over 31% to improve flow, reduce restriction.
• Made from 4130 High Strength Alloy Steel for never fail reliability
• Hand TIG welded 
• Made in the USA

$131.00
Per Page      1 - 5 of 5
  • 1

Brands