Morimoto

Sort By:  
02-08 MAZDA 6 / MAZDASPEED 6 Morimoto RETRO-QUIK Kit (MS6-RETQUIK)

PRODUCT DETAILS

LUCKY YOU:  We know how it goes: even with the stock fog lights turned on to supplement the low beams, you still can't see anything at night. Luckily for you, the Morimoto Retro-Quik system is designed as a direct bolt-on upgrade for a big performance boost inside the headlights on all first-gen Mazda6 cars. 

BI-XENON PROJECTORS: Morimoto's most modern bi-xenon, the Mini H1 7.0, was an instant winner upon launch. Representing the first full overhaul of the Mini H1 since way back when the 1.0 came out, it's now one of the most advanced headlight projectors in the world today. Revised reflector optics paired with their curved cutoff shield produces one of the widest low beam patterns we've ever seen, and a high beam that will easily go the distance. Kuria Optic clear lenses maximize intensity throughout, and keep the cutoff line sharp, colorful, and attractive. New side-action solenoids are more than 3x stronger than the old and fussy vertically-sprung units. Result: Maximum light on the ground, zero glare to oncoming traffic.

MOUNTING HARDWARE: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of the kit are designed to adapt the Morimoto Mini 7.0 Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome.  

OPTIONAL HID BALLASTS: Morimoto’s XB ballasts are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in on place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Hardly are all aftermarket-HID ballasts the same, and the XB’s make that clear in most every category in our opinion.

OPTIONAL H1 HID BULBS: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

OPTIONAL RELAY HARNESS: As one of the most important parts in any HID lighting upgrade, don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are or how good your bulbs are, if your harness is a piece of crap, when it gives out your headlights are gonzo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. With triple-sealed twin relays, 14ga. stranded copper wiring, over-molded fittings, and plug-n-play functionality, it will ensure everything functions properly and permanently from the original in-cabin controls. It’s easily the best headlight wire harness out there.

OPTIONAL HIGH BEAM SPLITTERS: Double high beams?! whaaaat! Put simply, the optional Morimoto high beam splitters allow you to make this feature work easily without any cutting or splicing to the factory wiring by diverting power from the halogen bulb into the projector’s high beam solenoid, making them both work at the same time.

OPTIONAL HOUSING SEALANT: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn’t prevent their new headlights from fogging up is beyond us. It’ll be the best twelve bucks you’ve ever spent.


WHAT'S INCLUDED

PROJECTORS:
2x Morimoto Mini H1 7.0

RQ BRACKETS / HARDWARE:2x Custom G10 Fiberglass / Stainless

WARRANTY:5 Years

OPTIONAL HID BALLASTS:2x Morimoto XB35 AMP

OPTIONAL H1 HID BULBS:2x Morimoto XB

OPTIONAL WIRE HARNESS:1x Your Preference

OPTIONAL HIGH BEAM SPLITTERS:2x Morimoto Splitters

OPTIONAL HOUSING SEALANT:1x Morimoto RetroRubber

COMPATIBILITY

2002-2008:Mazda6 and Mazdaspeed6

CAPABILITIES:Both Low & High Beam

CERTIFICATIONS:Exceeds DOT requirements


TECH SPECS

OPERATING RANGE:-40C to +125C

XB BALLAST INPUT:9-32VDC

XB BALLAST OUTPUT:85VAC 35W

XB BALLAST MAX V:25kV (at start-up)

XB35 BALLAST LIFESPAN:2500 Hours

XB55 BALLAST LIFESPAN:2000 Hours

3000K BULBS:Golden Yellow (~2800 lm)

4500K BULBS:Warm White (~3500 lm)

5500K BULBS:Pure White (~3400 lm)

6500K BULBS:Cool White (~3200 lm)

XB55 50W BALLASTS:Not Compatible

$30.00
HID SYSTEMS (UNIVERSAL) H1: MORIMOTO ELITE (H1MEHID)

PRODUCT DETAILS

*Message or email for shipping quote as it will be charged separate, due to a glitch with this product.*

RENOWNED: The Morimoto Elite Systems have earned their reputation amongst many as the aftermarket's best set of HID's. We urge you to check out the specs below, read the Reviews and then ask yourself whether your ability to see well while driving at night is worth saving a couple bucks?

OPTIONED OUT: With a variety of available options, this Morimoto Elite H1 HID kit can be configured perfectly just for you. This helpful video goes over each of the options shown above.

HID BALLASTS: Designed in California by Morimoto’s engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today’s most modern iteration of a model that has sold more than half a million units since inception, and we don’t think it can really get any better!

H1 HID BULBS: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

WIRE HARNESS: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.

OPTIONAL CANBUS HARNESSES: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling any warnings.

BACKED UP: Let's not forget the 5-year warranty on the entire kit*. The Elite system is designed to run for 2500 hours, so that's what it's guaranteed for. Don't buy into empty promises from other places offering BS "lifetime" warranties. Nothing lasts forever, and if you think "the other guy" will be there to pick up the phone or even stay in business long enough to assist you when there's a problem; guess again! [*XB55 H1 HID kits have a 3 year warranty]

USER-APPROVED: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5,6) that span several generations of the Elite HID systems! If you haven’t made a decision just yet, keep reading!

WHAT'S INCLUDED

OPTIONAL CAPACITOR LINK: 1x Morimoto Waterproof Cap Link

COMPATIBILITY

TECH SPECS

  • BALLAST INPUT: 9-32V DC

  • BALLAST OUTPUT: 85V AC 35W or 50W

  • BALLAST MAX. V: 25kV (at start-up)

  • SYSTEM OPERATING RANGE: -40C to +125C

  • 35W RATED LIFESPAN: 2,500 hours

  • 50W RATED LIFESPAN: 2,000 hours

  • 3000K BULBS: Golden Yellow ~2800lm (each)

  • 3800K BULBS: Halogen White ~3000lm (each)

  • 4500K BULBS: Warm White ~3500lm (each)

  • 5500K BULBS: Pure White ~3400lm (each)

  • 6500K BULBS : Cool White ~3200lm (each)

  • 50W BALLASTS: (+20% intensity) (-20% lifespan)(-1000K color)

$0.00
HID SYSTEMS (UNIVERSAL) H1: MORIMOTO POWERHOUSE HID SYSTEM (H1PHHID)

PRODUCT DETAILS

*Message or email for shipping quote as it will be charged separate, due to a glitch with this product.*

RENOWNED: The Morimoto Elite Systems have earned their reputation amongst many as the aftermarket's best set of HID's. We urge you to check out the specs below, read the Reviews and then ask yourself whether your ability to see well while driving at night is worth saving a couple bucks?

OPTIONED OUT: With a variety of available options, this Morimoto Elite H1 HID kit can be configured perfectly just for you. This helpful video goes over each of the options shown above.

HID BALLASTS: Designed in California by Morimoto’s engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today’s most modern iteration of a model that has sold more than half a million units since inception, and we don’t think it can really get any better!

H1 HID BULBS: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

WIRE HARNESS: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.

OPTIONAL CANBUS HARNESSES: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling any warnings.

BACKED UP: Let's not forget the 5-year warranty on the entire kit*. The Elite system is designed to run for 2500 hours, so that's what it's guaranteed for. Don't buy into empty promises from other places offering BS "lifetime" warranties. Nothing lasts forever, and if you think "the other guy" will be there to pick up the phone or even stay in business long enough to assist you when there's a problem; guess again! [*XB55 H1 HID kits have a 3 year warranty]

USER-APPROVED: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5,6) that span several generations of the Elite HID systems! If you haven’t made a decision just yet, keep reading!

WHAT'S INCLUDED

OPTIONAL CAPACITOR LINK: 1x Morimoto Waterproof Cap Link

COMPATIBILITY

TECH SPECS

  • BALLAST INPUT: 9-32V DC

  • BALLAST OUTPUT: 85V AC 35W or 50W

  • BALLAST MAX. V: 25kV (at start-up)

  • SYSTEM OPERATING RANGE: -40C to +125C

  • 35W RATED LIFESPAN: 2,500 hours

  • 50W RATED LIFESPAN: 2,000 hours

  • 3000K BULBS: Golden Yellow ~2800lm (each)

  • 3800K BULBS: Halogen White ~3000lm (each)

  • 4500K BULBS: Warm White ~3500lm (each)

  • 5500K BULBS: Pure White ~3400lm (each)

  • 6500K BULBS : Cool White ~3200lm (each)

  • 50W BALLASTS: (+20% intensity) (-20% lifespan)(-1000K color)

$105.00
Per Page      1 - 3 of 3
  • 1

Brands