Volkswagen

Sort By:  
74~83 VW Golf/Rabbit MKI TSP Racing G Series Street Coilovers (COSGS-VW-60)

Product Description

TSP Racing G Series Coilover kits are built for road and track use, TSP's Coilovers are fully height-adjustable, allowing you to keep the ride height the same as factory, or up to 50mm/2in lower. Damping of the piston valves are matched to each spring rate. The springs are preloaded from the factory, so you don't have to configure that before driving. Just set your ride height and damping preference with the 24 click linear adjustments.

The engineers in our factory invest time and money into research and development to ensure the highest quality, best performance kits on the market. TSP Racing Coilovers are not 'one size fits all' with adapters. Each kit is designed specifically for the vehicle, and all kits are tested and developed to ensure maximum performance.

Street Spring Rates

Front
7kg/mm or 392lbs/in
Rear
4kg/mm or 224lbs/in

Damper Style

Front
McPherson
Rear
A-Arm

Each kit contains:

  • 4 x Suspension dampers (either one piece or 2 piece dampers depending on vehicle)
  • 4 x SAE-9254 cold-wound steel springs
  • 4 x Damping force adjustment knobs
  • 2 x Aluminum alloy pillow ball top hat plates
  • 2 x Spanner wrenches to adjust ride height
  • 1 x Owners manual with warranty card


Instruction Manuals

Got your new coilovers and need to know how to properly adjust them?

Instructions


Aluminum alloy upper mounts, surface anodized treatment, very strong, heat-resistant, wear-resistant, corrosion-resistant aluminum oxide layer. TSP Racing rubber top plates are utilized frequently on our kits. If the front of the vehicle utilizes a camber plate, the rear will use a rubber top plate, although pillowball tops are frequently available for dedicated track vehicles. For all kits in which a camber plate cannot be utilized (A-arm suspensions) the top plates will be rubber front and rear. The main design feature of the rubber top plate is that it dampens NVH from reaching the cabin as much as possible enabling an OEM-like quiet ride. All rubber top plates have a durometer rating of 75A in order to achieve the best balance between performance and comfort.

Pillow Ball Top Hats

The pillowball top plate is used as an upgrade in the rear of a vehicle in lieu of the rubber top plate. Rubber is used as standard to limit NVH from making its way into the cabin although this upgrade is available on various chassis at the customer’s request. Please contact us directly to see what options are available for your specific platform. The pillowball top plate is a good upgrade for customers seeking a more track oriented, rigid setup where NVH is not much of a factor.

SAE9254 Steel Springs

Cold roll formed, anti-deformed with its excellent steel property and prolonged life span.3 main styles are used; linear, s-barrel, and v-barrel

Springs are marked with their length and spring rate in mm-kg/mm for example 220-07 os a 220 mm long spring with 07kg/mm spring rate.

French TOTAL Rotary Dedicated Oil

Corresponds to more changing stroke, stable properties can delay the recession, and remain similar viscosity even at extremely high temperatures.

NOK Oil Seals

We use the same NOK Oil seals as Tein. They are used for Anti-attrition and spoilage after long-term usage. Reducing the problem of oil leaks.

Lower Mounts/Base

The lower mount is where our suspension bolts to your wheel hubs. Each lower mount is designed to be an OEM replacement. We provide any and all OEM mounting points and brackets that were on the OEM shock. The lower mount, and the upper mount, is where reverse engineering the OEM suspension plays its biggest role. The process ensures everything is welded and mounted in OEM positions so that your brake lines, wheel speed sensors, and harnesses are a direct fit. Our lower mounts, whenever possible, are made of seamless steel tubing and all brackets are hand welded. Once the lower mount is completed, it is then sand blasted and powder coated in order to prevent rust and corrosion.

Shocks

We are now at the center point of our kit. As you can imagine, we have a wide variety of shock types, lengths and diameters. Each vehicle depending on our data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in our factory and dyno tested before use in our kits. This also helps to ensure there are no oil leaks or noise. Shocks are paired together by their compression and rebound numbers after dyno testing to a 3% variance from side to side. This means that in your kit, the fronts and rears are paired almost exactly the same to ensure proper ride quality and performance of the suspension. Each shock is coated in black via EPD, which provides a cohesive appearance, and to help with corrosion resistance.

Adjustment Rings

Height adjustments are made with separate CNC-Machined locking rings for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows for a conservative drop to more aggressive ride heights for an aggressive stance, or to fine tune your suspension for the circuit to gain full potential of your vehicle's handling capabilities.

Our basic lock ring is located under the spring seat. This ring is special because its primary function is to torque against the spring seat and lock it in place. The lock ring will torque and secure itself to the spring seat securely once properly tightened so that the preload does not change unless the customer decides to make a change. The spring seat and basic lock ring are the two rings that are responsible for gaining leverage to make height adjustment for our coilover systems. Please note that you do not turn the rings independently to adjust height, you simply use them as a leverage point to rotate the shock body into and out of the lower mount to adjust height, but they must be locked together to achieve this.

The lower lock ring is tasked with keeping the shock locked into place once final ride height is selected. The lower lock ring must be loosened before making any sort of height adjustment and locked down properly afterwards using our spanner wrenches.

If you want to lower the vehicle, you spin the spring seat clockwise to thread the shock body into the lower mount.

 

 

Tools

Tools that are included in the kit are the spanner wrenches and your adjustment knobs. These tools are what give you the ability to really customize and tune your new suspension system.

The Spanner wrenches are a crucial tool in adjusting the ride height of your vehicle. They allow you to adjust the position of the shock inside the body and insure the tension on your spring.

The adjustment knobs are used to help you customize the overall feel of your ride, whether your damping is soft or firm.

On G-Racing coilovers with 32 click adjustment your recommended settings are;

17-32: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
1-8: Suggested for common street use.

On G-Street Coilovers with 24 click adjustment your recommended settings are;

17-24: Suggested for sportier/aggressive use.
9-16: Suggested for spirited driving use.
1-8: Suggested for common street use.

 

Warranty

TSP Racing coilovers come with a 1 year unlimited mile limited warranty that covers all the main shock body components.

6 month warranty of consumables like rubber top mount, end links, etc

Camber plates are not covered under this warranty and have warranty because of the metal on metal contact.

All kits are completely rebuildable and individual parts are available separately for purchase.

 

Thumbnail Image 1

Adjuster Extensions

Adjuster extensions allow you to remotely adjust your damping on your TSP Racing Coilovers, which is especially handy when they are in hard to reach locations.


Adjuster Extensions

Specs


G-Street $900.00

24 Click Linear Damping Adjustments
Aluminum Plates with Camber Adjustments in the front and Aluminum Plates with Pillow Ball Bushings in the rear
Ride Height Adjustable Shocks
OEM Fitment with brackets and mounting points

Contact Us

TruSpeed Performance LLC
Salt Lake City, UT 84107
P: (801) 948-0877

Social

Testimonials

...

Talon T. from Montana

These are great. Took a little long to get but I got the first set of TSP G-Street Coilovers. I use them daily and finally broke in. Perfect for my area. No more body roll. Awesome control. If I need to change my ride height for winter mode I can easily. Thank you TSP.
...

Adam H. from Illinois

Seem to be built pretty good and would rate quality 7 outta 10 
Install was straight forward and everything fit perfect will rate 10/10 for install and fitment
Ride quality is good and will need to adjust the dampening again so I will rate the ride quality 7/10 
All in all very happy with the coilovers and would recommend to anyone

About the TSP brand

After quite a few years of research and networking with the industry's best manufacturers, and fabricating and building some prototype parts, TruSpeed Performance decided to launch the TSP brand early 2016. We decided to start with a focus on Suspension and Alignment parts as there are so many companies out there increasing and tuning engines but many often neglect tuning the suspension. Not only does a car need to go fast, but it needs to handle as well. We decided to start by offering quality coilover systems for a large variety of vehicles. After a good amount of searching and negotiating, we decided to work with a company out of Taiwan who was putting out an impressive product and that had over 10 years of experience building suspension systems for other major companies. We were impressed by the quality of the materials used, and their willingness to create and customize applications for our customer's needs. We are constantly expanding the applications that are well over 700 at this point.

We plan to continue to grow the brand and are already putting out our Tru-Align Alignment systems to compliment and help best utilize the power of our TSP Racing G Series Coilovers.


Copyright © 2016 TruSpeed Performance. All rights reserved.

$900.00
ATE Type200 Brake Fluid DOT 4 1L (106256)

Product Description

What makes ATE Typ200 a popular brake fluid choice among motorsports participants is its performance, and low boiling point.  This is a DOT4 brake fluid that can be used for race, as well as street use.  This is a long lasting fluid that can remain in use for at least 3 years. But its also compatible with most DOT3, DOT4, or DOT5.1 fluids.

The price will include a full liter in brake fluid.

Specifications

Brand: ATE
Boiling Dry Point: 536°F
Boiling Wet Point: 388°F
Color: Amber
DOT Rating: Dot 4
Type: Conventional
Volume: 1L
$18.99
Braille Carbon AGM Battery B106C (B106C)
 

B106C Features

"Cool" Carbon Fiber case
Higher engine temps equal lower battery performance. Braille's exclusive Carbon Fiber Case protects the batteries internals from high temps and provides the longest service life. Don't settle for a metal case that conducts heat, be cool
Direct replacement for:
YTX9-BS, ETX9

Carbon AGM Features View More

Patent Pending Carbon Case Design Made for Extreme Temperatures and Vibration. More Reliability and Performance in High Temperatures. Exclusive Appearance and Design. Hand Selected Premium Products for the Highest Performing Advanced AGM Product.


  • Physical Specifications
  • BCI Group
    All Sizes
  • Weight
    6.9lbs / 3.1kg
  • Length
    5.8" / 147mm
  • Width
    3.4" / 86mm
  • Height
    4.2" / 106mm
  • Polarity
    Left Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    527
  • Amp Hour (AH)
    10
  • Reserve Capacity (RC)
    > 20 min.
  • Life Cycle @ 10% DOD
    3000

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$288.74
Braille Carbon AGM Battery B14115C (B14115C)
 

B14115C Features

Save Every Ounce
At under 12 pounds, the B14115C offers the power to start winning race motors. Using patented Advanced AGM racing technology 904 pulse cranking amps are available to get your vehicle started.
Direct replacement for:
TYX14-BS, YTX16-BS, ETX14

Carbon AGM Features View More

Patent Pending Carbon Case Design Made for Extreme Temperatures and Vibration. More Reliability and Performance in High Temperatures. Exclusive Appearance and Design. Hand Selected Premium Products for the Highest Performing Advanced AGM Product.

  • Physical Specifications
  • BCI Group
    All sizes
  • Weight
    11.5lbs / 5.2kg
  • Length
    5.8" / 147mm
  • Width
    3.4" / 86mm
  • Height
    5.8" / 147mm
  • Polarity
    Left Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    904
  • Amp Hour (AH)
    15
  • Reserve Capacity (RC)
    25 mins.
  • Life Cycle @ 10% DOD
    3000
  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$314.99
Braille Carbon AGM Battery B2015C (B2015C)
 

B2015C Features

"Cool" Carbon Fiber Case
Higher engine temps equal lower battery performance. Braille's exclusive Carbon Fiber Case protects the batteries internals from high temps and provides the longest service life. Don't settle for a metal case that conducts heat, be cool.

Note: Carbon case is slightly wider & longer than standard case, so battery boxes with tight tolerances may require some modifications. Measure to ensure fitment.

Direct replacement for:
YTX20L-BS, YB18L-A, ETX20L, HD

Carbon AGM Features View More

Patent Pending Carbon Case Design Made for Extreme Temperatures and Vibration. More Reliability and Performance in High Temperatures. Exclusive Appearance and Design. Hand Selected Premium Products for the Highest Performing Advanced AGM Product.

  • Physical Specifications
  • BCI Group
    All sizes
  • Weight
    15lbs / 6.8kg
  • Length
    7.2" / 183mm
  • Width
    3.65" / 93mm
  • Height
    6.2" / 157mm
  • Polarity
    Right Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1067
  • Amp Hour (AH)
    20
  • Reserve Capacity (RC)
    35 mins.
  • Life Cycle @ 10% DOD
    3100
  • Usage
    • Advanced AGM
    • Motorsports
    • Consumer Auto
    • Race Auto
    • Motorcycle
    • ATV
    • Marine
$341.24
Braille Carbon AGM Battery B3121C (B3121C)
 
B3121C Features
"Cool" Carbon Fiber Case
Higher engine temps equal lower battery performance. Braille's exclusive Carbon Fiber Case protects the batteries internals from high temps and provides the longest service life. Don't settle for a metal case that conducts heat, be cool.

Note: Carbon case is slightly wider & longer than standard case, so battery boxes with tight tolerances may require some modifications. Measure to ensure fitment.

Carbon AGM Features View More

Patent Pending Carbon Case Design Made for Extreme Temperatures and Vibration. More Reliability and Performance in High Temperatures. Exclusive Appearance and Design. Hand Selected Premium Products for the Highest Performing Advanced AGM Product.

  • Physical Specifications
  • BCI Group
    All sizes
  • Weight
    21lbs / 9.5kg
  • Length
    6.8" / 174mm
  • Width
    5.2" / 132mm
  • Height
    6.9" / 177mm
  • Polarity
    Right Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1380
  • Amp Hour (AH)
    31
  • Reserve Capacity (RC)
    1 hr 15 mins
  • Life Cycle @ 10% DOD
    3100
  • Usage
    • Advanced AGM
    • Motorsports
    • Consumer Auto
    • Race Auto
    • Motorcycle
    • Marine
    • Aircraft
$395.74
Braille Lightweight AGM Battery B106 (B106)
 

B106 Features

Save Every Ounce
At under 7 pounds, the B106 is our lightest battery yet. Using our AGM racing technology we have put a lot of power into a very small package. With 510 pulse cranking amps this has enough power to start more than any other battery in its weight class and most commonly used in powersports/motorcycle applications. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)
Direct replacement for:
YTX9-BS, ETX9
Common upgrade for:
PC310

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.

  • Physical Specifications
  • BCI Group
    9
  • Weight
    6.9lbs / 3.1kg
  • Length
    5.8" / 147mm
  • Width
    3.4" / 86mm
  • Height
    4.2" / 107mm
  • Polarity
    Left Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    527
  • Amp Hour (AH)
    10
  • Reserve Capacity (RC)
    > 20 min.
  • Life Cycle @ 10% DOD
    2000

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$157.49
Braille Lightweight AGM Battery B129 (B129)
 

B129 Features

"Custom for Your Application
At 9 pounds, the B129 boasts 813 pulse cranking amps more than any other battery in its weight class. This is the perfect battery for those that need just little bit more power than the B106, but are looking to save every ounce vs. stepping up to a B14115 battery. Most common applications are powersports/motocycle applications. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)

Direct replacement for:
YTX12-BS, YB12B-B2, ETX12

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.

  • Physical Specifications
  • BCI Group
    All Sizes
  • Weight
    9.5lbs / 4.3kg
  • Length
    5.8" / 147mm
  • Width
    3.4" / 86mm
  • Height
    5.1" / 129mm
  • Polarity
    Left Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    813
  • Amp Hour (AH)
    12
  • Reserve Capacity (RC)
    > 20 min.
  • Life Cycle @ 10% DOD
    2000

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$167.99
Braille Lightweight AGM Battery B14115 (B14115)
 

B14115 Features

It Started a Mutiny
Our B14115 battery was the first battery we released. This battery has great all around performance for small displacement motors. Using our AGM racing technology it has 904 PCA, more than any other battery in its weight class. Common applications include powersports/motorcycles, but also small displacement automotive race vehicle applications. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)

Direct replacement for:
YTX14-BS, YTX16-BS, ETX14

Common upgrade for:
PC545

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.


  • Physical Specifications
  • BCI Group
    All Sizes
  • Weight
    11.5lbs / 5.2kg
  • Length
    5.8" / 147mm
  • Width
    3.4" / 86mm
  • Height
    5.8" / 147mm
  • Polarity
    Left Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    904
  • Amp Hour (AH)
    15
  • Reserve Capacity (RC)
    15
  • Life Cycle @ 10% DOD
    3000

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$178.49
Braille Lightweight AGM Battery B2015 (B2015)
 

B2015 Features

Just Right
At under 15 pounds, the B2015 is out most popular non-carbon racing battery. It is able to start larger engines easily for racing and offers daily driving capability for 4 & 6 cylinder motors with ease. With 1067 pulse cranking amps this has enough power to start more than any other battery in its weight class. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)

Direct replacement for:
YTX20L-BS, YB18L-A, ETX20L, HD

Common Upgrade for:
PC680

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.


  • Physical Specifications
  • BCI Group
    All Sizes
  • Weight
    15lbs / 6.8kg
  • Length
    6.8" / 173mm
  • Width
    3.4" / 86mm
  • Height
    6.1" / 155mm
  • Polarity
    Right Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1067
  • Amp Hour (AH)
    21
  • Reserve Capacity (RC)
    35 min.
  • Life Cycle @ 10% DOD
    3100

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$209.99
Braille Lightweight AGM Battery B2317 (B2317)
 

B2317 Features

Designed for Dual Batteries - 24V
At under 17 pounds, the B2317 is the left positive terminal designed to be a dual battery twin with the B2317R (right side positive) option. The dimensions are designed to run 2 batteries in the space of just 1 normal battery. This allows more reliability or 24 volt performance. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)

Direct replacement for:
YB16-B, YB16C-B, ETX16

Common Upgrade for:
PC625

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.


  • Physical Specifications
  • BCI Group
    All Sizes
  • Weight
    17lbs / 7.7kg
  • Length
    6.8" / 175mm
  • Width
    4" / 102mm
  • Height
    6.1" / 155mm
  • Polarity
    Left Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1191
  • Amp Hour (AH)
    23
  • Reserve Capacity (RC)
    45 min.
  • Life Cycle @ 10% DOD
    3100

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$209.99
Braille Lightweight AGM Battery B2317RP (B2317RP)
 

B2317RP Features

Designed for Dual Batteries - 24V
At under 17 pounds, the B2317RP is the right positive terminal designed to be a dual battery twin with the B2317(left side positive) option. The dimensions are designed to run 2 batteries in the space of just 1 normal battery. This allows more reliability or 24 volt performance. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)

Direct replacement for:
YB16HL-A, YB16L-B, ETX16L

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.


  • Physical Specifications
  • BCI Group
    All Sizes
  • Weight
    17lbs / 7.7kg
  • Length
    6.8" / 175mm
  • Width
    4" / 102mm
  • Height
    6.1" / 155mm
  • Polarity
    Right Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1191
  • Amp Hour (AH)
    23
  • Reserve Capacity (RC)
    45 min.
  • Life Cycle @ 10% DOD
    3100

  • Usage
    • Advanced AGM
    • Motorsports
    • Race Auto
    • Motorcycle
    • ATV
$209.99
Braille Lightweight AGM Battery B2618 (B2618)
 

B2618 Features

Thin to Win
At under 18 pounds, the B2618 has the highest amp hour to pound rating yet. Using our Advanced AGM racing technology we have put a lot of power into a very thin package. This battery is very popular in the endurance racing vehicles and performance street/hot rods looking for a slim battery due to space constraints. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)
Direct replacement for:
Y50-N18L-A, ETX18L
Common Upgrade for:
PC950 or PC1100

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.

  • Physical Specifications
  • BCI Group
    All sizes
  • Weight
    18.5lbs / 8.4kg
  • Length
    8.1" / 206mm
  • Width
    3.5" / 89mm
  • Height
    6.3" / 160mm
  • Polarity
    Right Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1168
  • Amp Hour (AH)
    26
  • Reserve Capacity (RC)
    48 mins.
  • Life Cycle @ 10% DOD
    3100
  • Usage
    • Advanced AGM
    • Motorsports
    • Consumer Auto
    • Race Auto
    • Motorcycle
    • ATV
    • Trucks
    • Marine
$230.99
Braille Lightweight AGM Battery B3121 (B3121)
 

B3121 Features

Cubic Horsepower
At under 22 pounds, the B3121 is our lightest do eveything battery yet. Using our Advanced AGM racing technology we have put a lot of power into a very small package. With 1380 pulse cranking amps this has enough power to start more than any other battery in its weight class. This is the perfect model for those who want to shave half the weight of a stanard Group 34 battery and still have enough power to crank over a V8 engine. Used in everything from large Harley Davidsons to Corvettes & Vipers. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)
Direct replacement for:
YIX30L, YB30L-B, ETX30L, HD 66010-97
Common Upgrade for:
PC925 (same size, 5 pounds lighter, 50% more cranking power)

Lightweight AGM Features View More

Highest Cranking Power Lead Battery Available. All Season Reliability. Stainless Steel Terminals. Environmentally Sourced Recycled Materials.

  • Physical Specifications
  • BCI Group
    All sizes
  • Weight
    21lbs / 9.5kg
  • Length
    6.6" / 168mm
  • Width
    5.2" / 132mm
  • Height
    6.8" / 173mm
  • Polarity
    Right Side Positive
  • Performance
  • Voltage
    12
  • Full Charge Voltage
    13.2
  • Pulse Cranking Amps (PCA)
    1380
  • Amp Hour (AH)
    31
  • Reserve Capacity (RC)
    1 hr 15 mins
  • Life Cycle @ 10% DOD
    3100
  • Usage
    • Advanced AGM
    • Motorsports
    • Consumer Auto
    • Race Auto
    • Motorcycle
    • Trucks
    • Marine
    • Aircraft
$241.49
Hella H3 12V/55W Halogen Bulb (H83135051)
Product Description

Hella halogen light bulbs are similar to incandescent bulbs in construction, but with much better performance. The halogen bulbs' filament burns at a much higher temperature in an atmospheric vacuum, radiating a much whiter light. These bulbs create a higher, more consistent output throughout their lives. There are various styles to choose from—to replace burned out headlamps, running lights, backup lights, and more.
$2.43
HID SYSTEMS (UNIVERSAL) DDM Ultra Canbus HID kit (UCBK)

Details & Product Specs

Free worldwide shipping

The DDM Lighting Ultra CAN-bus HID kit is built on our proven technology to bring you an even more stable HID Kit that is compatible with your vehicles Can-bus system and provides increased longevity and performance. The Ultra Can-bus HID kits will produce over three times the output of your standard 55W halogen bulb.

Ballast: 
The ballasts have been further improved for 2015 to require less current on startup to protect the factory wiring and to extend the life of the bulb by not forcing too much power into it at once. OEM like ballasts use ASIC (application specific integrated circuit) chip to be the one of the most efficient ballasts on the market. DDM Tuning ballasts can also provide constant power to older bulbs which require more voltage to ignite. The output frequency is 250HZ, reducing the chances for electronic feedback which can cause humming in improperly grounded audio systems. DDM Lighting Ultra Can-bus ballasts will work on vehicles with a Can-bus system without additional accessories when compared to the DDM HID kit. These ballasts are virtually bulletproof and are designed to function for 10-15 years.
 
Bulbs: Our Premium Ultra HID bulbs are quite simply the best. Modeled after the Osram CBI line of performance bulbs we've sourced quartz glass from Philips, salts from APL USA and electrodes from Plansee in Austria.. On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already an industry leading bulb. The quartz glass is optically clear with a UV coating to protect the headlights from UV radiation. The warm up time on the Ultra bulbs is about 20% quicker than Apexcone bulbs and will reach full brightness in 10-15 seconds.

Alignment:
 Manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible.

Output:
 Up to 3400 Lumens with a 4500K bulb.

Warranty: 
As always our HID kits come with a lifetime warranty.
 
Kit Includes:
2 x Ultra HID Ballasts
2 x Ultra HID Bulbs

Confirmed fitment for following vehicles:
BMW
Chevy Silverado, Volt
Chrysler 300
Dodge Charger, Challenger, Magnum (Please use Canbus 35W only)
Dodge Ram: Single Beam kits (Please use Canbus 35W only)
Ford Edge, Escape, Explorer, F150 Raptor, F250, F350, Focus, Fusion
GMC Sierra, Envoy
Hyundai
Jeep: Most Single Beam Kits
Kia
Mercedes Benz
Mini Cooper
Toyota Corolla, Matrix, Tacoma
Volvo
VW

PS:
- Lexus Fog Lights (2013 up) 
- Nissan Fog Lights (2016 up) 
- Subaru Fog Lights (2013 up)
- Toyota Fog Lights (2013 up)
- Bulbs marked with the following: "H16" "12V 19W" "64219L " This is a 19W halogen bulb that has a very similar base to the H11. Do not use HID's in these applications, the housings are made of a soft plastic and may melt with 35W HID kits. Please check the bulbs before ordering. Using an H11 LED bulb is recommended.
$119.95
HID SYSTEMS (UNIVERSAL) H1 ACME STANDARD (H1STD)

PRODUCT DETAILS

*Message or email for shipping quote as it will be charged separate, due to a glitch with this product.*

GAME CHANGER: ACME brings some serious value to the table: Morimoto wiring harness, ACME ballasts, and ACME H1 HID bulbs for an unbeatable price. If you're looking to pinch pennies or just want the most for the least, the ACME H1 HID kit is unstoppable!

ACME 35W SPEEDYSTART BALLASTS: Speedy Gonzales has nothin' on the ACME SpeedyStart 35w ballasts when it comes to warm up time. These go zero to full intensity in just 3.5 seconds! So good in fact that we've discontinued the once popular "FastBright" ballasts in their favor. Their external igniters and high voltage wiring is shielded to help mitigate EMI interference (radio static) so it's unlikely that these ballasts will disturb your afternoon rock block! They may not have some of the bells, whistles, or warranty that the more expensive options offer, but they certainly check the box when it comes to bang for the buck.

ACME 75W ARSENAL BALLASTS: Bring out the big guns! ACME's Arsenal ballast is a powerhouse. Making 75w of mosquito-melting power, these ballasts should be reserved for the back roads only! With power comes great responsibility, and for that reason we really only recommend using these with auxiliary spot lights or dedicated HID high beams. While these ballasts have a rated lifespan of 2000 hours, they will surely halve the lifespan of any HID bulb that they drive and may possibly harm the reflective finishes inside of headlight reflectors/projectors when used for prolonged periods at a time. We will not warranty any bulbs if used with these ballasts. They are not compatible with vehicles with canbus systems and/or automatic headlights.

ACME H1 BULBS: ACME H1 HID bulbs are precise, color-accurate, and most importantly: affordable! At the base of the glass capsule resides an accurate ceramic sleeve, ensuring the alignment of the capsule is exactly perpendicular to the base and ready for whatever! We'll be blunt: for their price, you're not getting a better H1 HID bulb than ACME Standards.

MORIMOTO RELAY HARNESSES: Have fully-sealed weather pack relays with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality. Forget about cutting and splicing, because all harness options in this kit will make your new low and high beam function perfectly from the original cabin controls.

OPTIONAL CANBUS HARNESSES: (35W ONLY) Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling any warnings.

WHAT'S INCLUDED

COMPATIBILITY

TECH SPECS

  • BALLAST OUTPUT: 35W or 75W

  • BALLAST IGNITION V.: 23kV

  • BALLAST INPUT RANGE: 9-32V DC

  • BALLAST INPUT CURRENT: < 5A (35w) or <9A (75w)

  • BALLAST STABLE TIME: 3.5s (35w) or 10s (75w)

  • SYSTEM RATED LIFESPAN: 2,000 hours

  • 4300K BULBS: Warm White (~3000 lm)

  • 5000K BULBS: Pure White (~2800 lm)

  • 6000K BULBS: Cool White (~2500 lm)

  • 8000K BULBS: Crisp Blue (~2200 lm)

  • WITH 75W BALLASTS: Lifespan (-1000h), Color (-2500K)

$0.00
HID SYSTEMS (UNIVERSAL) H1: MORIMOTO ELITE (H1MEHID)

PRODUCT DETAILS

*Message or email for shipping quote as it will be charged separate, due to a glitch with this product.*

RENOWNED: The Morimoto Elite Systems have earned their reputation amongst many as the aftermarket's best set of HID's. We urge you to check out the specs below, read the Reviews and then ask yourself whether your ability to see well while driving at night is worth saving a couple bucks?

OPTIONED OUT: With a variety of available options, this Morimoto Elite H1 HID kit can be configured perfectly just for you. This helpful video goes over each of the options shown above.

HID BALLASTS: Designed in California by Morimoto’s engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today’s most modern iteration of a model that has sold more than half a million units since inception, and we don’t think it can really get any better!

H1 HID BULBS: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

WIRE HARNESS: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.

OPTIONAL CANBUS HARNESSES: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling any warnings.

BACKED UP: Let's not forget the 5-year warranty on the entire kit*. The Elite system is designed to run for 2500 hours, so that's what it's guaranteed for. Don't buy into empty promises from other places offering BS "lifetime" warranties. Nothing lasts forever, and if you think "the other guy" will be there to pick up the phone or even stay in business long enough to assist you when there's a problem; guess again! [*XB55 H1 HID kits have a 3 year warranty]

USER-APPROVED: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5,6) that span several generations of the Elite HID systems! If you haven’t made a decision just yet, keep reading!

WHAT'S INCLUDED

OPTIONAL CAPACITOR LINK: 1x Morimoto Waterproof Cap Link

COMPATIBILITY

TECH SPECS

  • BALLAST INPUT: 9-32V DC

  • BALLAST OUTPUT: 85V AC 35W or 50W

  • BALLAST MAX. V: 25kV (at start-up)

  • SYSTEM OPERATING RANGE: -40C to +125C

  • 35W RATED LIFESPAN: 2,500 hours

  • 50W RATED LIFESPAN: 2,000 hours

  • 3000K BULBS: Golden Yellow ~2800lm (each)

  • 3800K BULBS: Halogen White ~3000lm (each)

  • 4500K BULBS: Warm White ~3500lm (each)

  • 5500K BULBS: Pure White ~3400lm (each)

  • 6500K BULBS : Cool White ~3200lm (each)

  • 50W BALLASTS: (+20% intensity) (-20% lifespan)(-1000K color)

$0.00
HID SYSTEMS (UNIVERSAL) H1: MORIMOTO POWERHOUSE HID SYSTEM (H1PHHID)

PRODUCT DETAILS

*Message or email for shipping quote as it will be charged separate, due to a glitch with this product.*

RENOWNED: The Morimoto Elite Systems have earned their reputation amongst many as the aftermarket's best set of HID's. We urge you to check out the specs below, read the Reviews and then ask yourself whether your ability to see well while driving at night is worth saving a couple bucks?

OPTIONED OUT: With a variety of available options, this Morimoto Elite H1 HID kit can be configured perfectly just for you. This helpful video goes over each of the options shown above.

HID BALLASTS: Designed in California by Morimoto’s engineer, Yoshi Ishida, the Morimoto XB 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. They are available in both 35w and 50w versions, use proprietary software by the pros at Hylux paired with packaging perfection from the masters at Morimoto. This is today’s most modern iteration of a model that has sold more than half a million units since inception, and we don’t think it can really get any better!

H1 HID BULBS: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlight…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

WIRE HARNESS: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.

OPTIONAL CANBUS HARNESSES: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling any warnings.

BACKED UP: Let's not forget the 5-year warranty on the entire kit*. The Elite system is designed to run for 2500 hours, so that's what it's guaranteed for. Don't buy into empty promises from other places offering BS "lifetime" warranties. Nothing lasts forever, and if you think "the other guy" will be there to pick up the phone or even stay in business long enough to assist you when there's a problem; guess again! [*XB55 H1 HID kits have a 3 year warranty]

USER-APPROVED: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5,6) that span several generations of the Elite HID systems! If you haven’t made a decision just yet, keep reading!

WHAT'S INCLUDED

OPTIONAL CAPACITOR LINK: 1x Morimoto Waterproof Cap Link

COMPATIBILITY

TECH SPECS

  • BALLAST INPUT: 9-32V DC

  • BALLAST OUTPUT: 85V AC 35W or 50W

  • BALLAST MAX. V: 25kV (at start-up)

  • SYSTEM OPERATING RANGE: -40C to +125C

  • 35W RATED LIFESPAN: 2,500 hours

  • 50W RATED LIFESPAN: 2,000 hours

  • 3000K BULBS: Golden Yellow ~2800lm (each)

  • 3800K BULBS: Halogen White ~3000lm (each)

  • 4500K BULBS: Warm White ~3500lm (each)

  • 5500K BULBS: Pure White ~3400lm (each)

  • 6500K BULBS : Cool White ~3200lm (each)

  • 50W BALLASTS: (+20% intensity) (-20% lifespan)(-1000K color)

$105.00
Motul RBF600 Brake Fluid Synthetic DOT 4 500ml (100949)

DESCRIPTION

The Motul RBF600 Brake fluid is 100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems. The elevated boiling point of RBF 600 being at 312 C / 593 F enables effective braking even under the extreme conditions of competition. The very high wet boiling point (216ºc / 420ºF), is superior to conventional brake fluids and provides a particularly efficient braking system in rain and retards the apparition of vapor lock. FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925. The RBF600 Brake fluid is sold per bottle. 2 Bottles are recommended for a full system flush.

SPECIFICATIONS


Brand: Motul
Boiling Dry Point: 593°F
Boiling Wet Point: 420°F
Color: Yellow
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
$17.54
$20.04
Stoptech STR600 Brake Fluid DOT 4 500ml (501.00001)

Product Description

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company’s offerings. 

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility. 

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd. 

StopTech® High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (§ 571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

SPECIFICATIONS


Brand: Stoptech
Boiling Dry Point: 622°F
Boiling Wet Point: 404°F
Color: Not supplied
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
$27.99
Stoptech STR660 Brake Fluid DOT 4 500ml (501.00002)

Product Description

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company’s offerings. 

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility. 

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd. 

StopTech® High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (§ 571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

SPECIFICATIONS


Brand: Stoptech
Boiling Dry Point: 622°F
Boiling Wet Point: 404°F
Color: Not supplied
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
$27.99
VALVOLINE® FULL SYNTHETIC WITH MAXLIFE TECHNOLOGY SAE 5W30 MOTOR OIL (VV179)

Product Information

  • Oil Composition:  Synthetic
  • Viscosity Grade:  5W-30
  • Volume (Qt):  1 Quart

Applications for your Vehicles

  • This product is universal and applies to all vehicles.
  • Detailed Description

    SAE 5W-30; Full Synthetic; High Mileage; 1 Quart


Every Engine Should Run Like New

From the first use, Valvoline Full Synthetic with MaxLife Technology (FSwMT) provides your car’s engine our maximum protection against heat, deposits and wear. Formulated with more anti wear additives that stay in your oil longer, FSwMT supplies 40% more anti-wear film than Mobil 1*. FSwMT is specially formulated to meet the needs of vehicles as they age past 75,000 miles. It’s advanced formula can also be used in newer cars to help prevent the causes of engine breakdown before they begin. Valvoline Full Synthetic with MaxLife Technology is our ultimate level of protection helping your engine run like new longer.

*Based on anti-wear film generated in Cameron Plint Test, Valvoline Full Synthetic with MaxLife Technology 5W-30 vs Mobil 1 5W-30

$9.99
$16.93
VW/Audi MKV/VI AirLift Performance Series Front Kit (75576)

PRODUCT DESCRIPTION

Get the stance you want and the performance you need with Air Lift’s Performance air suspension kits! Every kit we offer is fully engineered to properly fit your vehicle, provide unmatched static drop, and deliver ride and handling capability that exceeds factory suspensions. No other lowering suspension provides a more versatile package for daily use.

Get your MKV or MKVI down! With almost 6″ of drop and all the versatility of air, the Air Lift Performance kit is the best choice for show stance, daily driving AND track performance. Get the looks you crave with the performance you need!

NOTE: 55mm front strut only

KIT FEATURES

  • Drop = 147mm/5.8″
  • Durable double bellows springs
  • 30-level damping adjustable monotube struts
  • Adjustable front camber plates
  • Anodized red aluminum accents
  • Powdercoated gloss black steel brackets

Modifications Required: NONE.

INCLUDED WITH EACH KIT

  • Pair of air-over shocks with 30-level damping adjustment
  • Braided stainless steel leader hoses
  • 1/4″ & 3/8″ PTC fittings
  • All mounting hardware
  • Detailed instruction manual
  • Air Lift’s 1-year warranty and excellent customer support

MODEL FITMENT:

  • 2005-2014 Audi A3 (FWD only)
  • 2006-2015 Audi TT (FWD only)
  • 2012-2014 Volkswagen Beetle (Turbo only)
  • 2009-2017 Volkswagen CC (does not fit 4Motion)
  • 2007-2016 Volkswagen EOS
  • 2006-2014 Volkswagen GTI
  • 2006-2014 Volkswagen Golf
  • 2005-2008 Volkswagen Golf R32
  • 2005-2017 Volkswagen Jetta
  • 2011-2017 Volkswagen Jetta VI GLI
  • 2006-2017 Volkswagen Passat (does not fit 4Motion)
  • 2006-2014 Volkswagen Rabbit
  • NOTE: 55mm front strut only

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

$89.00
$925.00
VW/Audi MKV/VI AirLift Performance Series Rear Kit (75676)

PRODUCT DESCRIPTION

Get the stance you want and the performance you need with Air Lift’s Performance air suspension kits! Every kit we offer is fully engineered to properly fit your vehicle, provide unmatched static drop, and deliver ride and handling capability that exceeds factory suspensions. No other lowering suspension provides a more versatile package for daily use.

Get your MKV or MKVI down! With almost 6″ of drop and all the versatility of air, the Air Lift Performance kit is the best choice for show stance, daily driving AND track performance. Get the looks you crave with the performance you need!

NOTE: 55mm front strut only

KIT FEATURES

  • Drop = 147mm/5.8″
  • Durable double bellows springs
  • 30-level damping adjustable monotube struts
  • Adjustable front camber plates
  • Anodized red aluminum accents
  • Powdercoated gloss black steel brackets

Modifications Required: NONE.

INCLUDED WITH EACH KIT

  • Pair of air-over shocks with 30-level damping adjustment
  • Braided stainless steel leader hoses
  • 1/4″ & 3/8″ PTC fittings
  • All mounting hardware
  • Detailed instruction manual
  • Air Lift’s 1-year warranty and excellent customer support

MODEL FITMENT:

  • 2005-2014 Audi A3 (FWD only)
  • 2006-2015 Audi TT (FWD only)
  • 2012-2014 Volkswagen Beetle (Turbo only)
  • 2009-2017 Volkswagen CC (does not fit 4Motion)
  • 2007-2016 Volkswagen EOS
  • 2006-2014 Volkswagen GTI
  • 2006-2014 Volkswagen Golf
  • 2005-2008 Volkswagen Golf R32
  • 2005-2017 Volkswagen Jetta
  • 2011-2017 Volkswagen Jetta VI GLI
  • 2006-2017 Volkswagen Passat (does not fit 4Motion)
  • 2006-2014 Volkswagen Rabbit
  • NOTE: 55mm front strut only

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

$900.00
Per Page      1 - 26 of 26
  • 1

Brands