Hyundai

Sort By:  
HOWE BASIC QUICKENER - 1.5:1 RATIO (5225)

Product Details

The Howe Basic Quickeners meet the requirements of the job and keep cost down. Has undergone extensive cycle and load testing to assure durability. Not as tough as the Stealth HD but alloy steel gears and unique tooth design are far stronger and more durable than other small body quickeners on the market. .735-36 spline.

Steering Quickner Ratio:1.5:1

Shaft End 1:3/4 in. 36-spline

Shaft End 2:3/4 in. 36-spline

Reversible:No

Quantity:Sold individually.

Notes:The overall length of the basic quickener is 8 in. and housing diameter is 2 5/8 in.

Add to Cart
$86.97
$102.20
Howe Racing COUPLER FOR QUICKNER .735 X 36 SPLINE (5221)
Product Details

Fits all of our steering quickeners. Features a .735-36 spline on one side and 3/4” bore for steering shaft on the other.

Steering Coupler Material:Steel

Steering Coupler Finish:Natural

Shaft End 1:3/4 in. 36-spline

Quantity:Sold individually.

Add to Cart
$11.97
$13.90
K&N Universal Performance Gold Oil Filter (HP-1004)

Product Description

  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • Resin-impregnated filter media traps 99% of harmful contaminants
  • 1 inch exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1 inch nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.

Product Specifications

Anti Drain Back ValveYes
Bypass ValveYes
Filter MaterialHigh Flow Premium Media
Gasket MaterialNitrile Rubber
Height3.406 in (87 mm)
Outside Diameter3.156 in (80 mm)
Product Box Height4 in (102 mm)
Product Box Length3.19 in (81 mm)
Product Box Width3.19 in (81 mm)
Product StyleOil Filters
PSI Relief Valve11-17
Removal NutYes
Removal Nut Size1 inch
StyleCanister
Thread SpecificationM20 x 1.5-6H
Weight0.8 lb (0.3 kg)


Additional Information

Add to Cart
$11.50
$17.69
VALVOLINE® FULL SYNTHETIC WITH MAXLIFE TECHNOLOGY SAE 5W30 MOTOR OIL (VV179)

Product Information

  • Oil Composition:  Synthetic
  • Viscosity Grade:  5W-30
  • Volume (Qt):  1 Quart

Applications for your Vehicles

  • This product is universal and applies to all vehicles.
  • Detailed Description

    SAE 5W-30; Full Synthetic; High Mileage; 1 Quart


Every Engine Should Run Like New

From the first use, Valvoline Full Synthetic with MaxLife Technology (FSwMT) provides your car’s engine our maximum protection against heat, deposits and wear. Formulated with more anti wear additives that stay in your oil longer, FSwMT supplies 40% more anti-wear film than Mobil 1*. FSwMT is specially formulated to meet the needs of vehicles as they age past 75,000 miles. It’s advanced formula can also be used in newer cars to help prevent the causes of engine breakdown before they begin. Valvoline Full Synthetic with MaxLife Technology is our ultimate level of protection helping your engine run like new longer.

*Based on anti-wear film generated in Cameron Plint Test, Valvoline Full Synthetic with MaxLife Technology 5W-30 vs Mobil 1 5W-30

Add to Cart
$9.99
$16.93
Whiteline Front Camber Adjusting Bolt Kit - 14mm (Multiple Fitments) ( KCA414)
Product Description

Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 1.75 deg. Unlike other friction lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Install guide
Z201A.pdf (124.00 KB)
Installation Instructions (124.00 KB)
Add to Cart
$35.82
$39.80
Per Page      1 - 8 of 8