Chevy

Sort By:  
05-06 Chevy Cobalt SS Spec Stage 1 Clutch Kit (SC071)
Product Description

The SPEC Stage 1 Clutch Kit features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications. *Features* * High clamp pressure plate * Steel-backed and multi-compound woven organic material * High torque sprung hub and disc assembly * Bearing and tool kit (select models, please inquire) *Types of Driving* Street, Drag, Drift, Road Race, Rallye, Pulling, Autocross

Vehicle Fitment
2005-2007 Chevrolet Cobalt SS L4

Torque Capacity 275 ft/lbs
Add to Cart
$561.60
$624.00
triplec1
H&R TC114 Triple Camber Adjustment Bolts (hrTC114)

Product Description

  • Correct camber for perfect alignment
  • Wide adjustment range +/- 0 to 3º
  • Easy to install, simple to use

Consisting of a pair of specially-designed bolts, H&R patented ‘Triple C’ Camber Adjustment Bolts replace the original upper fastening bolts on McPherson strut applications. As the bolt is turned, a small cam eccentric alters the vehicle’s camber, allowing adjustments from 0-3 degrees, positive or negative.

Add to Cart
$55.95
04900-HDTZ-H
05-06 Chevrolet Cobalt 2.0L SS Supercharged / Saturn ION Red Line Ecotec S Clutch Masters Clutch Kit (04900-HDTZ-H)
Product Description


Segmented Kevlar Steel Back System, 110% over stock holding capacity.

The FX300 System uses the Power Plus I Pressure Plate with the Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure (overstock components), long life disc and smooth engagement.

*Features*
* Heavy-duty street & racing system
* Holding capacity 110% over stock
* Heavy-Duty reinforced pressure plate
* Hi-Leverage pressure ring design
* Sprung hub/cushioned disc
* Steel backed Segmented Carbon/Kevlar

*Includes*
* Pressure Plate
* Clutch Disc
* Throw-out Bearing (when applicable)
* Pilot Bearing or Bushing (when applicable)
* Alignment Tool
 
Vehicle Fitment

2005-2007 Chevrolet Cobalt SS L4
2004-2007 Saturn Ion Red Line L4
Add to Cart
$733.50
$815.00
K70403-HD
05-07 Chevy Cobalt SS/ Saturn Ion 2L South Bend / DXD Racing Clutch Stg 1 HD Clutch Kit (K70403-HD)
Product Description

Stage 1 Clutch Kit; HD Series. Heavy duty version of the stock O. E. clutch. The Pressure Plate has an increase clamp load for extended life. The disc is dual dampened for smooth engagement and increased transmission life. Premium friction material ensures rapid heat dissipation increasing the life of the clutch.
Recommended for spirited and daily driving.

Vehicle Fitment

  • 2005-2007 Chevrolet Cobalt SS L4.-cc 
  • 2005-2007 Saturn Ion Red Line L4.-cc 
Torque Rating: 225ft/lbs
Add to Cart
$353.71
$364.65
K70403-HD
05-07 Chevy Cobalt SS/ Saturn Ion 2L South Bend / DXD Racing Clutch Stg 1 HD Clutch Kit ( Copy ) (K70403-HD)
Product Description

Stage 1 Clutch Kit; HD Series. Heavy duty version of the stock O. E. clutch. The Pressure Plate has an increase clamp load for extended life. The disc is dual dampened for smooth engagement and increased transmission life. Premium friction material ensures rapid heat dissipation increasing the life of the clutch.
Recommended for spirited and daily driving.

Vehicle Fitment

  • 2005-2007 Chevrolet Cobalt SS L4.-cc 
  • 2005-2007 Saturn Ion Red Line L4.-cc 
Torque Rating: 225ft/lbs
Add to Cart
$364.65
05-07 Chevy Cobalt SS/ Saturn Ion 2L South Bend / DXD Racing Clutch Stg 2 HD Clutch Kit (K70403-HD-O)
Product Description

*STAGE 2 DAILY:* Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Recommended usage is daily, street and moderate race. *STAGE 2 ENDURANCE:* An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high RPM. The pressure plate fulcrum is altered for a positive disengagement and a quick shift. The disc is engineered with a Dual Damped design to provide accurate control when accelerating through corners. The friction material is a hybrid using a full face Feramic (Sintered Iron) lining on the flywheel side and a high metal content Organic lining on the pressure plate side. Engagement is positive yet buffered due to the high graphite content unique to Feramic facings. Recommended uses are daily and street with an emphasis on Rally and Endurance racing. *STAGE 2 DRAG:* Drag racing requires a Single Mass SFI approved Flywheel to be included with each kit when the original design is Dual Mass. This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick. The puck design disc reduces rotational mass and total drive surface area while increasing pounds per square inch on the surface of the friction material. This combination minimizes inertia, accelerating the transfer of torque from the engine to the wheels. The friction material used for this race application is Graphite Impregnated Ceramic. This compound exceeded all other friction materials when testing for durability, reduced chatter, heat transfer and torque capacity. Recommended uses are drag racing, drifting and limited street.

Vehicle Fitment

  • 2005-2007 Chevrolet Cobalt SS L4.-cc 
  • 2005-2007 Saturn Ion Red Line L4.-cc 
Torque Rating: 250ft/lbs
Add to Cart
$380.92
$392.70
HOWE BASIC QUICKENER - 1.5:1 RATIO (5225)

Product Details

The Howe Basic Quickeners meet the requirements of the job and keep cost down. Has undergone extensive cycle and load testing to assure durability. Not as tough as the Stealth HD but alloy steel gears and unique tooth design are far stronger and more durable than other small body quickeners on the market. .735-36 spline.

Steering Quickner Ratio:1.5:1

Shaft End 1:3/4 in. 36-spline

Shaft End 2:3/4 in. 36-spline

Reversible:No

Quantity:Sold individually.

Notes:The overall length of the basic quickener is 8 in. and housing diameter is 2 5/8 in.

Add to Cart
$86.97
$102.20
Howe Racing COUPLER FOR QUICKNER .735 X 36 SPLINE (5221)
Product Details

Fits all of our steering quickeners. Features a .735-36 spline on one side and 3/4” bore for steering shaft on the other.

Steering Coupler Material:Steel

Steering Coupler Finish:Natural

Shaft End 1:3/4 in. 36-spline

Quantity:Sold individually.

Add to Cart
$11.97
$13.90
K&N Universal Performance Gold Oil Filter (HP-1004)

Product Description

  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • Resin-impregnated filter media traps 99% of harmful contaminants
  • 1 inch exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1 inch nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.

Product Specifications

Anti Drain Back ValveYes
Bypass ValveYes
Filter MaterialHigh Flow Premium Media
Gasket MaterialNitrile Rubber
Height3.406 in (87 mm)
Outside Diameter3.156 in (80 mm)
Product Box Height4 in (102 mm)
Product Box Length3.19 in (81 mm)
Product Box Width3.19 in (81 mm)
Product StyleOil Filters
PSI Relief Valve11-17
Removal NutYes
Removal Nut Size1 inch
StyleCanister
Thread SpecificationM20 x 1.5-6H
Weight0.8 lb (0.3 kg)


Additional Information

Add to Cart
$11.50
$17.69
VALVOLINE® FULL SYNTHETIC WITH MAXLIFE TECHNOLOGY SAE 5W30 MOTOR OIL (VV179)

Product Information

  • Oil Composition:  Synthetic
  • Viscosity Grade:  5W-30
  • Volume (Qt):  1 Quart

Applications for your Vehicles

  • This product is universal and applies to all vehicles.
  • Detailed Description

    SAE 5W-30; Full Synthetic; High Mileage; 1 Quart


Every Engine Should Run Like New

From the first use, Valvoline Full Synthetic with MaxLife Technology (FSwMT) provides your car’s engine our maximum protection against heat, deposits and wear. Formulated with more anti wear additives that stay in your oil longer, FSwMT supplies 40% more anti-wear film than Mobil 1*. FSwMT is specially formulated to meet the needs of vehicles as they age past 75,000 miles. It’s advanced formula can also be used in newer cars to help prevent the causes of engine breakdown before they begin. Valvoline Full Synthetic with MaxLife Technology is our ultimate level of protection helping your engine run like new longer.

*Based on anti-wear film generated in Cameron Plint Test, Valvoline Full Synthetic with MaxLife Technology 5W-30 vs Mobil 1 5W-30

Add to Cart
$9.99
$16.93
Whiteline Front Camber Adjusting Bolt Kit - 14mm (Multiple Fitments) ( KCA414)
Product Description

Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 1.75 deg. Unlike other friction lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Install guide
Z201A.pdf (124.00 KB)
Installation Instructions (124.00 KB)
Add to Cart
$35.82
$39.80
Per Page      1 - 15 of 15