Chrysler

Sort By:  
triplec1
H&R TC114 Triple Camber Adjustment Bolts (hrTC114)

Product Description

  • Correct camber for perfect alignment
  • Wide adjustment range +/- 0 to 3º
  • Easy to install, simple to use

Consisting of a pair of specially-designed bolts, H&R patented ‘Triple C’ Camber Adjustment Bolts replace the original upper fastening bolts on McPherson strut applications. As the bolt is turned, a small cam eccentric alters the vehicle’s camber, allowing adjustments from 0-3 degrees, positive or negative.

Add to Cart
$55.95
11-14 Chrysler 200 K&N Performance Air Intake System (69-2546TS)
Product Description
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 69-2546TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chrysler 200 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow.

69-2546TS Performance Air Intake System Video

The K&N 69-2546TS fits some Chrysler 200, and Dodge Avenger models. See vehicle applications link under Available Information below for details.
Estimated Horsepower Gain8.38 HP @ 5506 RPM
Replacement FilterRF-1048
Air Filter ColorRed
Air Filter MaterialCotton Gauze
Air Filter Outlet ShapeRound
Clamps Included5
Clamp MaterialStainless Steel
Clamp StyleRegular
Couplers Included2
System TypeCold-Air Intake System
Product Style69 Series Typhoon Kits
Air Filter Height6 in (152 mm)
Intake Pipe Color / FinishSilver
Intake Pipe MaterialAluminum
Street Legal In All US StatesSee Application Link Above
TUV Approved (Europe)No
Weight12.2 lb (5.5 kg)
Product Box Height12.5 in (318 mm)
Product Box Length22.25 in (565 mm)
Product Box Width14.25 in (362 mm)
Mounting Hardware IncludedYes
Add to Cart
$322.99
$585.69
11-14 Chrysler 200 Sedan Megan Racing EZ Street Series Coilover Kit (MR-CDK-DAV07-EZ)

Product Description

Megan's most recent addition to their expansive coil-over kit line up, the EZ STREET coil-over line up is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance.


SPECIFICATIONS & FEATURES:

APPLICATION: 
- Dodge Avenger Sedan 2008-2014

*Note: Reuse OEM front top mount

SPRING RATES:
F: 6 kg/mm
R: 4 kg/mm

- 15 Levels of Adjustable Damper Strength

- Aluminum Brackets paired with rubber inserts

- Rubber Dust Covers

- Adjustable Ride Height

- Conservative Spring Rates

- Single-Cylinder Design - mono-tube

- All coil-over damper kits come with 1 year manufacture-defect warranty.

- All Hardware is Included

MSRP: $799.00

Add to Cart
$799.00
11-14 Chrysler 200 TSP Racing Tru-Align FastCam Bolts (Pair) (Replaces 14mm Bolts) (CR-81260)

Product Description

---------------------------------------------------------------------------
Make a two bolt strut adjustable up to ±1.75° camber with the Tru-Align FastCam bolts from TSP. Simply remove the upper bolt, install the FastCam bolts, loosen the lower bolt, and dial in the required change.

  • Make camber changes a cost effective, quick one-person job without grinding
  • TSP’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry 
  • Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
  • Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment. 

    Front Adjustment range:Camber ±1.75°
    Installation time: .4 hr/side
    Required: 1 kit per axle
Add to Cart
$19.99
$25.75
11-14 Chrysler 200 TSP Racing Tru-Align Trailing Arm (CE-67018)

Product Description

---------------------------------------------------------------------------
This fully adjustable trailing link provides ±4° camber change for the rear of the Chrysler 200. The simple to install "remove and replace" kit provides a lifetime of adjustabilty to maximize tire life and dial in handling. 

Rear Adjustment range: Camber ±4°
Installation time: .5 hr/side 
Required: 1 per wheel
Add to Cart
$60.60
$115.25
11-14 Megan Coilover Camber Plates (pair) (camplate)
Special order part takes 2-4 weeks to come in.
Add to Cart
$135.00
ATE Type200 Brake Fluid DOT 4 1L (106256)

Product Description

What makes ATE Typ200 a popular brake fluid choice among motorsports participants is its performance, and low boiling point.  This is a DOT4 brake fluid that can be used for race, as well as street use.  This is a long lasting fluid that can remain in use for at least 3 years. But its also compatible with most DOT3, DOT4, or DOT5.1 fluids.

The price will include a full liter in brake fluid.

Specifications

Brand: ATE
Boiling Dry Point: 536°F
Boiling Wet Point: 388°F
Color: Amber
DOT Rating: Dot 4
Type: Conventional
Volume: 1L
Add to Cart
$18.99
Hella H3 12V/55W Halogen Bulb (H83135051)
Product Description

Hella halogen light bulbs are similar to incandescent bulbs in construction, but with much better performance. The halogen bulbs' filament burns at a much higher temperature in an atmospheric vacuum, radiating a much whiter light. These bulbs create a higher, more consistent output throughout their lives. There are various styles to choose from—to replace burned out headlamps, running lights, backup lights, and more.
Add to Cart
$2.43
Hella HB3 9005 12V 65W High Performance 2.0 Bulb Kit (Pair) (H83300082)

Product Description

HELLA High Performance 2.0 Bulbs


Features:

• Complies with DOT, ECE and INMETRO when applicable 
• OE Quality and built under stringent testing requirements
• Re-engineered filament for greater light output* 
• Exclusive halogen gas formulation for improved performance*
• High quality quartz glass with a specialized blue coating
• Manufactured under strict HELLA guidelines
• An optimal balance of bulb performance and bulb life 
• Offered in a special kit that includes a pair of bulbs, gloves and silicone grease 
• Gloves protect the bulbs during installation
• Silicone Grease prevents false contacts and ensures an ideal connection
• 1 year warranty
*Versus HELLA standard bulbs.

Specifications:
• Voltage: 12V
•  Approval: DOT, ECE and INMETRO when applicable

Technology:
• Halogen

Kit Includes:
• (2) High Performance Halogen Bulbs
• (1) Pair of Gloves

• (1) Packet of Silicone Grease
• (1) HELLA Sticker
• (1) HELLA Mini Brochure

Add to Cart
$35.52
HOWE BASIC QUICKENER - 1.5:1 RATIO (5225)

Product Details

The Howe Basic Quickeners meet the requirements of the job and keep cost down. Has undergone extensive cycle and load testing to assure durability. Not as tough as the Stealth HD but alloy steel gears and unique tooth design are far stronger and more durable than other small body quickeners on the market. .735-36 spline.

Steering Quickner Ratio:1.5:1

Shaft End 1:3/4 in. 36-spline

Shaft End 2:3/4 in. 36-spline

Reversible:No

Quantity:Sold individually.

Notes:The overall length of the basic quickener is 8 in. and housing diameter is 2 5/8 in.

Add to Cart
$86.97
$102.20
Howe Racing COUPLER FOR QUICKNER .735 X 36 SPLINE (5221)
Product Details

Fits all of our steering quickeners. Features a .735-36 spline on one side and 3/4” bore for steering shaft on the other.

Steering Coupler Material:Steel

Steering Coupler Finish:Natural

Shaft End 1:3/4 in. 36-spline

Quantity:Sold individually.

Add to Cart
$11.97
$13.90
K&N Universal Performance Gold Oil Filter (HP-1004)

Product Description

  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • Resin-impregnated filter media traps 99% of harmful contaminants
  • 1 inch exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1 inch nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.

Product Specifications

Anti Drain Back ValveYes
Bypass ValveYes
Filter MaterialHigh Flow Premium Media
Gasket MaterialNitrile Rubber
Height3.406 in (87 mm)
Outside Diameter3.156 in (80 mm)
Product Box Height4 in (102 mm)
Product Box Length3.19 in (81 mm)
Product Box Width3.19 in (81 mm)
Product StyleOil Filters
PSI Relief Valve11-17
Removal NutYes
Removal Nut Size1 inch
StyleCanister
Thread SpecificationM20 x 1.5-6H
Weight0.8 lb (0.3 kg)


Additional Information

Add to Cart
$11.50
$17.69
KMC KM685 District Wheels Matte Black 5x114.3 18"x 8" 38mm offset (KM68588012738)

Product Description

Construction: Cast Aluminum 
Available Diameters: 18", 19", 20", 22" 
VIEW ALL SPECS

ADDITIONAL OPTIONS

Don't see your color choice or specs? Design your own KM685 District! Wheel Pros allows you to pick your finishes and options on your KMC wheels they will build it to your specifications.

Available off the shelf color choices

SATIN BLACK
5-LUG

SATIN BLACK W/ MACHINED FACE
5-LUG
MATTE BRONZE
5-LUG
SILVER MACHINED
5-LUG

VIDEOS

  • KM685 SATIN BLACK
  • KM685 SILVER WITH MACHINED FACE
  • KM685 BRONZE
Add to Cart
$195.00
Motul RBF600 Brake Fluid Synthetic DOT 4 500ml (100949)

DESCRIPTION

The Motul RBF600 Brake fluid is 100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems. The elevated boiling point of RBF 600 being at 312 C / 593 F enables effective braking even under the extreme conditions of competition. The very high wet boiling point (216ºc / 420ºF), is superior to conventional brake fluids and provides a particularly efficient braking system in rain and retards the apparition of vapor lock. FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925. The RBF600 Brake fluid is sold per bottle. 2 Bottles are recommended for a full system flush.

SPECIFICATIONS


Brand: Motul
Boiling Dry Point: 593°F
Boiling Wet Point: 420°F
Color: Yellow
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
Add to Cart
$17.54
$20.04
Stoptech STR600 Brake Fluid DOT 4 500ml (501.00001)

Product Description

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company’s offerings. 

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility. 

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd. 

StopTech® High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (§ 571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

SPECIFICATIONS


Brand: Stoptech
Boiling Dry Point: 622°F
Boiling Wet Point: 404°F
Color: Not supplied
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
Add to Cart
$27.99
Stoptech STR660 Brake Fluid DOT 4 500ml (501.00002)

Product Description

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company’s offerings. 

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility. 

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd. 

StopTech® High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (§ 571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

SPECIFICATIONS


Brand: Stoptech
Boiling Dry Point: 622°F
Boiling Wet Point: 404°F
Color: Not supplied
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
Add to Cart
$27.99
Subaru/Mitsubishi/Chrysler/Dodge/Eagle Hawk HP+ Street Rear Brake Pads (HB367N.585)
Product Description

Caliper Type: OEM
Thickness: 0.585mm

*HP Plus ('N' Compound Code)*
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and “track day” applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.

Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.

* Extremely High Friction Output
* Fade Resistant
* Worthy for Autocross & Club Racing Events

*Note:* Hawk Performance burnishes its HP Plus brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.



Which pads are best for you?

Street Performance Compound Application

CODECOMPOUNDOPTIMAL
RANGE
MIN MAXTORQUECOMMENTS/REMARKS
RSTREET RACE100°-800°100° 1200°MEDIUM
  • Designed to and from the track without requiring a brake pad change
  • Wide temp range
  • Controllable torque
  • Smooth feel and bite
NHP+100º-600º100°-800°LOW
  • High initial bite
  • Designed for pavement circle track under 2800 lbs
  • Designed for applications not needing high deceleration rates
BHPS 5.0100°- 550°100°- 750°LOW
  • Increased stopping power compared to HPS
  • Gentle on rotors
  • Smooth and predictable torque
  • Virtually noise free
FHPS100°- 500°100°- 700°LOW
  • High friction/ torque hot or cold
  • Gentle on rotors
  • Provides consistent and controllable torque through temperature ranges compared to stock pads
  • Virtually noise free
ZCERAMIC100°- 450º100°- 650°LOW
  • High friction/ torque hot or cold
  • Gentle on rotors
  • Low dust output
  • Virtually noise free
YLTS100°- 500º100°- 650°LOW
  • Designed for brake systems found on full-size trucks
  • Gentle on rotors
  • Low dust output
  • Virtually noise free
PSUPER DUTY100°- 550º100°- 750°LOW
  • Designed for brake systems found on full-size trucks
  • Extremely high coefficient of friction and fade resistance
  • Recommended for professional fleet use
Add to Cart
$94.08
$104.53
VALVOLINE® FULL SYNTHETIC WITH MAXLIFE TECHNOLOGY SAE 5W30 MOTOR OIL (VV179)

Product Information

  • Oil Composition:  Synthetic
  • Viscosity Grade:  5W-30
  • Volume (Qt):  1 Quart

Applications for your Vehicles

  • This product is universal and applies to all vehicles.
  • Detailed Description

    SAE 5W-30; Full Synthetic; High Mileage; 1 Quart


Every Engine Should Run Like New

From the first use, Valvoline Full Synthetic with MaxLife Technology (FSwMT) provides your car’s engine our maximum protection against heat, deposits and wear. Formulated with more anti wear additives that stay in your oil longer, FSwMT supplies 40% more anti-wear film than Mobil 1*. FSwMT is specially formulated to meet the needs of vehicles as they age past 75,000 miles. It’s advanced formula can also be used in newer cars to help prevent the causes of engine breakdown before they begin. Valvoline Full Synthetic with MaxLife Technology is our ultimate level of protection helping your engine run like new longer.

*Based on anti-wear film generated in Cameron Plint Test, Valvoline Full Synthetic with MaxLife Technology 5W-30 vs Mobil 1 5W-30

Add to Cart
$9.99
$16.93
Whiteline Front Camber Adjusting Bolt Kit - 14mm (Multiple Fitments) ( KCA414)
Product Description

Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 1.75 deg. Unlike other friction lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Install guide
Z201A.pdf (124.00 KB)
Installation Instructions (124.00 KB)
Add to Cart
$35.82
$39.80
Per Page      1 - 22 of 22