Toyota

Sort By:  
89-99 Toyota MR2 Apexi N1 EVOLUTION DAMPER (APX-265AT011)

PRODUCT DESCRIPTION


The N1 Evolution is the newest generation of our track engineered flag ship N1 suspension. All N1 dampers feature large piston, monotube design using a threaded base for height adjustments without compromising shock or spring travel. Every year, we gather incredible amounts of suspension data from our direct involvement in many different racing series. This specialized data goes directly into our sports parts development to provide the customer with the same cutting edge suspension technology we use on all of our race vehicles.


Each N1 Evolution Damper is made CUSTOM (made-to-order), specifically to the demands of the customer. Whether it be for STREET, DRIFT, or CIRCUIT use, data is collected from the customer about the vehicle specifications and conditions to ensure the best assembly for the use required.

- Tire Specifications

- Wheel Specifications

- Engine Specifications

- Chassis Specifications

- Driving Style


PRODUCT FEATURES:

- 25-Way damping force adjustment to adapt to a variety of driving conditions.

- Monotube design with 46mm. diameter piston.

- Adjustable lower case design that allows ride height to be adjusted without affecting preload.

- Standardized 65mm. (ID) spring allows the use of a wide variety of readily available springs.

- Front strut- type setups include camber adjustment plates that utilize premium quality pillow-ball spherical bearings to minimize deflection, binding, and noise.

- GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation

- 100% Made in Japan, with precision Japanese components

- Overhaul services available

PRODUCT SPECIFICATIONS

Part Number265AT011
Damper ModelN1 Evolution Damper
Year1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
MakeToyota
ModelMR-2
Engine3S-GTE
ChassisSW20
Piston Diameter46mm.
Spring: Length / RateFront: 6 inch/12K, Rear: 8 inch/16K
Damper Camber AdjustmentFront: Yes, Rear: Not applicable
Damper Height Adjustment Range (mm.)Front: +60~-40, Rear: 0~-35
Special NotesCall for stock status and Special Order
Add to Cart
$3,225.00
90-95 Toyota MR2 Megan Racing EZ II Series Coilovers ( MR-CDK-TM90-EZII)

Product Description



Megan Racing EZII Series coilover system is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance.


SPECIFICATIONS & FEATURES:

APPLICATION: 
Toyota MR2 1990-1995 (SW21/SW20)

*Note: HIGHLY recommended using ADJUSTABLE SWAY BAR LINKS.

SPRING RATES:
F: 5 kg/mm
R: 8 kg/mm

- 15 Levels of Adjustable Damper Strength

- Aluminum Brackets paired with rubber inserts

- Rubber Dust Covers

- Adjustable Ride Height

- Conservative Spring Rates

- Single-Cylinder Design - monotube

- All coilover damper kits come with 1 year manufacture-defect warranty.

- All Hardware is Included
Add to Cart
$899.00
90-95 Toyota MR2 Megan Racing Street Series Coilovers (MR-CDK-TM90)

Product Description


Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.


Compression and rebound settings are adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics. 

Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows for a conservative drop to more aggressive ride heights for an aggressive stance, or to fine tune your suspension for the circuit to gain full potential of your vehicle's handling capabilities.

On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.

The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.


SPECIFICATIONS & FEATURES:

APPLICATION: 
Toyota MR2 90-95 
- Fits 91-95 Toyota MR2 (SW21/SW20)

SPRING RATES:
F: 5 kg/mm
R: 8 kg/mm

- 32 Levels of Damper Force Adjustment

- Pillow Ball Upper Mounts

- Rubber Dust Boots

- Adjustable Ride Height

- Aggressive Spring Rates

- Monotube Internal Construction

- Aluminum Brackets

- All coil-over damper kits come with 1 year manufacturer-defect warranty.

- All Hardware is Included

Note: HIGHLY recommended using ADJUSTABLE SWAY BAR LINKS.
Add to Cart
$900.00
90-99 Toyota MR2 (SW20l/SW21L) Tein Street Basis Coilovers (GST04-1USS2)

Product Description

Characteristics:
COMPARED TO THE ORIGINAL CAR, BODY ROLL IS SUPPRESSED, WITH A MAIN FOCUS ON RIDE COMFORT FOR EVERYDAY DRIVING ON STREETS AND HIGHWAYS.

Coilover Kit
 Upper MountBase Ride Height Drop (inch)Ride Height Adjustable Range (inch)Spring
 Max Low-HighRate (lbs./in. Kgf/mm)
Recommended Low-High

Free Length (mm)

I.D. (mm)
FrontOEM-1.6-2.6 to -0.82244.0
-2.0 to -1.2175Φ65
RearOEM-1.6-3.0 to -1.23927.0
-2.0 to -1.2200Φ70 - Φ100

STREET BASIS
Ride Height 
Adj.
more
Twin Tube 
Design
more
Description:
The Street Basis damper is the evolution of the popular BASIC coilover. Developed to provide a sporty ride feeling and aggressive stance. The shortened shell case design provides optimum damper stroke at lower than standard vehicle ride height. Vehicle ride height is adjustable via the ZT coated threaded sleeve. Updated internal components and external coatings increase durability and product life. Street Basis dampers are great for daily driving and spirited driving for all types of drivers.
Made in Japan under strict quality control standards and developed by highly trained suspension engineers.
Additional Features
• Steel Construction
• Twin Tube internal construction
• Larger piston diameter for strut type front and rear (22mm)
• Ride Height adjustable via spring seat
• Powder coated damper body
• Non-welded ZT coated Adjustment Tube
• Full-Length Dust Boots
• 1-piece Aluminum Spring Seat with Delrin Thrust Washer
• Available for Overhaul
• 1-year Manufacturers Defect Warranty
Contents of Damper Kit:
Shock Absorber × 4Bump Rubber × 4
Main Spring × 4*Hook Spanner × 2
*Some applications include helper springsDust Cover × 4**
Seat Lock × 4**Some kits will retain use of OEM Dust Covers
Spring Seats × 4Instruction Manual × 1
Delrin Thrust Washer × 4Stickers***
***(Note that Stickers do not come included for all JDM part numbers and for certain applications)
Add to Cart
$693.50
$730.00
90-99 Toyota MR2 BC Racing DR Series Coilovers (C-12-DR)

Product Description

Please allow 2-3 weeks for Delivery

Front Spring:5kg
Rear Spring:8kg
Camber:Front Standard/Rear not Available

Front Camber Plates come standard for this chassis. The camber plate itself utilizes a Pillowball Top Configuration for maximum performance and rigidity. The Rear Top Configuration is pressed-in rubber.

6061-T6 Aluminum Top Plates

SAE9254 Powder Coated Springs

6061-T6 Aluminum Lock Rings

53mm Aluminum Threaded Shock Bodies

Precision machine welded STKM13C Steel Lower Mounts or 6061-T6 milled Aluminum Lower Mounts where applicable

100% bolt on in place of OEM brackets


Add to Cart
$1,300.00
$1,500.00
90-99 Toyota MR2(SW20L/21L) TSP Racing G Series Street Coilovers (COSGS-TO-47)

Product Description

TSP Racing G Series Coilover kits are built for road and track use, TSP's Coilovers are fully height-adjustable, allowing you to keep the ride height the same as factory, or up to 50mm/2in lower. Damping of the piston valves are matched to each spring rate. The springs are preloaded from the factory, so you don't have to configure that before driving. Just set your ride height and damping preference with the 24 click linear adjustments.

The engineers in our factory invest time and money into research and development to ensure the highest quality, best performance kits on the market. TSP Racing Coilovers are not 'one size fits all' with adapters. Each kit is designed specifically for the vehicle, and all kits are tested and developed to ensure maximum performance.

Street Spring Rates

Front
5kg/mm or 280lbs/in
Rear
8kg/mm or 448lbs/in

Damper Style

Front
McPherson
Rear
McPherson

Each kit contains:

  • 4 x Suspension dampers (either one piece or 2 piece dampers depending on vehicle)
  • 4 x SAE-9254 cold-wound steel springs
  • 4 x Damping force adjustment knobs
  • 2 x Aluminum alloy pillow ball top hat plates
  • 2 x Spanner wrenches to adjust ride height
  • 1 x Owners manual with warranty card


Instruction Manuals

Got your new coilovers and need to know how to properly adjust them?

Instructions


Aluminum alloy upper mounts, surface anodized treatment, very strong, heat-resistant, wear-resistant, corrosion-resistant aluminum oxide layer. TSP Racing rubber top plates are utilized frequently on our kits. If the front of the vehicle utilizes a camber plate, the rear will use a rubber top plate, although pillowball tops are frequently available for dedicated track vehicles. For all kits in which a camber plate cannot be utilized (A-arm suspensions) the top plates will be rubber front and rear. The main design feature of the rubber top plate is that it dampens NVH from reaching the cabin as much as possible enabling an OEM-like quiet ride. All rubber top plates have a durometer rating of 75A in order to achieve the best balance between performance and comfort.

Pillow Ball Top Hats

The pillowball top plate is used as an upgrade in the rear of a vehicle in lieu of the rubber top plate. Rubber is used as standard to limit NVH from making its way into the cabin although this upgrade is available on various chassis at the customer’s request. Please contact us directly to see what options are available for your specific platform. The pillowball top plate is a good upgrade for customers seeking a more track oriented, rigid setup where NVH is not much of a factor.

SAE9254 Steel Springs

Cold roll formed, anti-deformed with its excellent steel property and prolonged life span.3 main styles are used; linear, s-barrel, and v-barrel

Springs are marked with their length and spring rate in mm-kg/mm for example 220-07 os a 220 mm long spring with 07kg/mm spring rate.

French TOTAL Rotary Dedicated Oil

Corresponds to more changing stroke, stable properties can delay the recession, and remain similar viscosity even at extremely high temperatures.

NOK Oil Seals

We use the same NOK Oil seals as Tein. They are used for Anti-attrition and spoilage after long-term usage. Reducing the problem of oil leaks.

Lower Mounts/Base

The lower mount is where our suspension bolts to your wheel hubs. Each lower mount is designed to be an OEM replacement. We provide any and all OEM mounting points and brackets that were on the OEM shock. The lower mount, and the upper mount, is where reverse engineering the OEM suspension plays its biggest role. The process ensures everything is welded and mounted in OEM positions so that your brake lines, wheel speed sensors, and harnesses are a direct fit. Our lower mounts, whenever possible, are made of seamless steel tubing and all brackets are hand welded. Once the lower mount is completed, it is then sand blasted and powder coated in order to prevent rust and corrosion.

Shocks

We are now at the center point of our kit. As you can imagine, we have a wide variety of shock types, lengths and diameters. Each vehicle depending on our data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in our factory and dyno tested before use in our kits. This also helps to ensure there are no oil leaks or noise. Shocks are paired together by their compression and rebound numbers after dyno testing to a 3% variance from side to side. This means that in your kit, the fronts and rears are paired almost exactly the same to ensure proper ride quality and performance of the suspension. Each shock is coated in black via EPD, which provides a cohesive appearance, and to help with corrosion resistance.

Adjustment Rings

Height adjustments are made with separate CNC-Machined locking rings for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows for a conservative drop to more aggressive ride heights for an aggressive stance, or to fine tune your suspension for the circuit to gain full potential of your vehicle's handling capabilities.

Our basic lock ring is located under the spring seat. This ring is special because its primary function is to torque against the spring seat and lock it in place. The lock ring will torque and secure itself to the spring seat securely once properly tightened so that the preload does not change unless the customer decides to make a change. The spring seat and basic lock ring are the two rings that are responsible for gaining leverage to make height adjustment for our coilover systems. Please note that you do not turn the rings independently to adjust height, you simply use them as a leverage point to rotate the shock body into and out of the lower mount to adjust height, but they must be locked together to achieve this.

The lower lock ring is tasked with keeping the shock locked into place once final ride height is selected. The lower lock ring must be loosened before making any sort of height adjustment and locked down properly afterwards using our spanner wrenches.

If you want to lower the vehicle, you spin the spring seat clockwise to thread the shock body into the lower mount.

 

 

Tools

Tools that are included in the kit are the spanner wrenches and your adjustment knobs. These tools are what give you the ability to really customize and tune your new suspension system.

The Spanner wrenches are a crucial tool in adjusting the ride height of your vehicle. They allow you to adjust the position of the shock inside the body and insure the tension on your spring.

The adjustment knobs are used to help you customize the overall feel of your ride, whether your damping is soft or firm.

On G-Racing coilovers with 32 click adjustment your recommended settings are;

17-32: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
1-8: Suggested for common street use.

On G-Street Coilovers with 24 click adjustment your recommended settings are;

17-24: Suggested for sportier/aggressive use.
9-16: Suggested for spirited driving use.
1-8: Suggested for common street use.

 

Warranty

TSP Racing coilovers come with a 1 year unlimited mile limited warranty that covers all the main shock body components.

6 month warranty of consumables like rubber top mount, end links, etc

Camber plates are not covered under this warranty and have warranty because of the metal on metal contact.

All kits are completely rebuildable and individual parts are available separately for purchase.

 

Thumbnail Image 1

Adjuster Extensions

Adjuster extensions allow you to remotely adjust your damping on your TSP Racing Coilovers, which is especially handy when they are in hard to reach locations.


Adjuster Extensions

Specs


G-Street $900.00

24 Click Linear Damping Adjustments
Aluminum Plates with Camber Adjustments in the front and Aluminum Plates with Pillow Ball Bushings in the rear
Ride Height Adjustable Shocks
OEM Fitment with brackets and mounting points

Contact Us

TruSpeed Performance LLC
Salt Lake City, UT 84107
P: (801) 948-0877

Social

Testimonials

...

Talon T. from Montana

These are great. Took a little long to get but I got the first set of TSP G-Street Coilovers. I use them daily and finally broke in. Perfect for my area. No more body roll. Awesome control. If I need to change my ride height for winter mode I can easily. Thank you TSP.
...

Adam H. from Illinois

Seem to be built pretty good and would rate quality 7 outta 10 
Install was straight forward and everything fit perfect will rate 10/10 for install and fitment
Ride quality is good and will need to adjust the dampening again so I will rate the ride quality 7/10 
All in all very happy with the coilovers and would recommend to anyone

About the TSP brand

After quite a few years of research and networking with the industry's best manufacturers, and fabricating and building some prototype parts, TruSpeed Performance decided to launch the TSP brand early 2016. We decided to start with a focus on Suspension and Alignment parts as there are so many companies out there increasing and tuning engines but many often neglect tuning the suspension. Not only does a car need to go fast, but it needs to handle as well. We decided to start by offering quality coilover systems for a large variety of vehicles. After a good amount of searching and negotiating, we decided to work with a company out of Taiwan who was putting out an impressive product and that had over 10 years of experience building suspension systems for other major companies. We were impressed by the quality of the materials used, and their willingness to create and customize applications for our customer's needs. We are constantly expanding the applications that are well over 700 at this point.

We plan to continue to grow the brand and are already putting out our Tru-Align Alignment systems to compliment and help best utilize the power of our TSP Racing G Series Coilovers.


Copyright © 2016 TruSpeed Performance. All rights reserved.

Add to Cart
$900.00
91-95 Toyota MR2 D2 Racing RS Series Coilovers (D-TO-43)

Product Description

The RS Series suspension kit is our most popular coilover. Featuring a 36-way damping and rebound adjustable monotube design, RS Series coilovers are perfect for the modified street car that also sees occasional track days. This coilover has separate height and preload adjustments allowing for optimal suspension tuning while maintaining full strut travel at all times.

Features:

  • 36-way damping adjustable monotube shock assemblies
  • Full ride height adjustability with separate spring preload
  • Anodized finish and Teflon coated threads to prevent rust
  • Upper camber plates and pillow ball mounts* (6061 Aluminum construction)
  • 1 Year Manufacturer’s Warranty
  • Serviceable in the USA
Add to Cart
$1,150.00
91-95 Toyota MR2 KW Coilover Kit V3 (35256004)

Product Description

Front Lowering:1.2" to 2.3"Rear Lowering:1.4" to 2.3"

KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening.
State of the art motorsport technology enables better performance on the streets. The independently adjustable compression and rebound dampening allows for cutom driving setups. 
The exclusive KW patented system has dual level valves that allow for adjustment of the rebound dampening for your road comfort and the compression dampening that controls the driving dynamics.

KW Coilover Kit V3 Toyota MR2 W2

This product is special order and may have an assembly time involved if not ready from KW.

The average lead time for this product to arrive is 19 business days if not currently built.

Installation Instructions

Listing of all vehicles this part can be used with.

Hide vehicle listing
Add to Cart
$2,269.49
ATE Type200 Brake Fluid DOT 4 1L (106256)

Product Description

What makes ATE Typ200 a popular brake fluid choice among motorsports participants is its performance, and low boiling point.  This is a DOT4 brake fluid that can be used for race, as well as street use.  This is a long lasting fluid that can remain in use for at least 3 years. But its also compatible with most DOT3, DOT4, or DOT5.1 fluids.

The price will include a full liter in brake fluid.

Specifications

Brand: ATE
Boiling Dry Point: 536°F
Boiling Wet Point: 388°F
Color: Amber
DOT Rating: Dot 4
Type: Conventional
Volume: 1L
Add to Cart
$18.99
Hella H3 12V/55W Halogen Bulb (H83135051)
Product Description

Hella halogen light bulbs are similar to incandescent bulbs in construction, but with much better performance. The halogen bulbs' filament burns at a much higher temperature in an atmospheric vacuum, radiating a much whiter light. These bulbs create a higher, more consistent output throughout their lives. There are various styles to choose from—to replace burned out headlamps, running lights, backup lights, and more.
Add to Cart
$2.43
HOWE BASIC QUICKENER - 1.5:1 RATIO (5225)

Product Details

The Howe Basic Quickeners meet the requirements of the job and keep cost down. Has undergone extensive cycle and load testing to assure durability. Not as tough as the Stealth HD but alloy steel gears and unique tooth design are far stronger and more durable than other small body quickeners on the market. .735-36 spline.

Steering Quickner Ratio:1.5:1

Shaft End 1:3/4 in. 36-spline

Shaft End 2:3/4 in. 36-spline

Reversible:No

Quantity:Sold individually.

Notes:The overall length of the basic quickener is 8 in. and housing diameter is 2 5/8 in.

Add to Cart
$86.97
$102.20
Howe Racing COUPLER FOR QUICKNER .735 X 36 SPLINE (5221)
Product Details

Fits all of our steering quickeners. Features a .735-36 spline on one side and 3/4” bore for steering shaft on the other.

Steering Coupler Material:Steel

Steering Coupler Finish:Natural

Shaft End 1:3/4 in. 36-spline

Quantity:Sold individually.

Add to Cart
$11.97
$13.90
K&N Universal Performance Gold Oil Filter (HP-1004)

Product Description

  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • Resin-impregnated filter media traps 99% of harmful contaminants
  • 1 inch exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1 inch nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.

Product Specifications

Anti Drain Back ValveYes
Bypass ValveYes
Filter MaterialHigh Flow Premium Media
Gasket MaterialNitrile Rubber
Height3.406 in (87 mm)
Outside Diameter3.156 in (80 mm)
Product Box Height4 in (102 mm)
Product Box Length3.19 in (81 mm)
Product Box Width3.19 in (81 mm)
Product StyleOil Filters
PSI Relief Valve11-17
Removal NutYes
Removal Nut Size1 inch
StyleCanister
Thread SpecificationM20 x 1.5-6H
Weight0.8 lb (0.3 kg)


Additional Information

Add to Cart
$11.50
$17.69
Motul RBF600 Brake Fluid Synthetic DOT 4 500ml (100949)

DESCRIPTION

The Motul RBF600 Brake fluid is 100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems. The elevated boiling point of RBF 600 being at 312 C / 593 F enables effective braking even under the extreme conditions of competition. The very high wet boiling point (216ºc / 420ºF), is superior to conventional brake fluids and provides a particularly efficient braking system in rain and retards the apparition of vapor lock. FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925. The RBF600 Brake fluid is sold per bottle. 2 Bottles are recommended for a full system flush.

SPECIFICATIONS


Brand: Motul
Boiling Dry Point: 593°F
Boiling Wet Point: 420°F
Color: Yellow
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
Add to Cart
$17.54
$20.04
Stoptech STR600 Brake Fluid DOT 4 500ml (501.00001)

Product Description

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company’s offerings. 

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility. 

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd. 

StopTech® High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (§ 571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

SPECIFICATIONS


Brand: Stoptech
Boiling Dry Point: 622°F
Boiling Wet Point: 404°F
Color: Not supplied
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
Add to Cart
$27.99
Stoptech STR660 Brake Fluid DOT 4 500ml (501.00002)

Product Description

Like all StopTech products, StopTech High Performance Brake Fluid is carefully designed to give drivers an edge in the punishing world of high performance motoring. For over a decade StopTech has engineered and delivered race- and championship-winning brake components and systems for high performance street driving as well as pure racing. StopTech High Performance Brake Fluid adds a new dimension to the company’s offerings. 

Available in STR-600 and STR-660 formulations for high performance street and racing applications respectively, the new StopTech High Performance Brake Fluid is a DOT 4 motor vehicle brake fluid, engineered to optimize brake system performance at high operating temperatures. In addition to guarding against boiling and subsequent loss of efficiency at severe racing temperatures, StopTech Brake Fluid maintains its excellent viscosity, lubricity and non-compressibility. 

StopTech Racing Brake Fluid stands out not just for its exceptional performance, but also for its stylish and functional packaging. StopTech Brake Fluid comes bottled in a special metal container that is not only more durable, but also gives the fluid up to 25 percent longer shelf life than typical plastic bottles provide. Both in looks and in performance, StopTech Brake Fluid stands out from the crowd. 

StopTech® High Performance Brake Fluid conforms to and exceeds the current specification of U.S. FMVSS 116 (§ 571.116) DOT 4, is road legal, and compatible with modern ABS and other vehicle dynamic control systems. StopTech brake fluid is mixable with all DOT 3 and 4 products.

SPECIFICATIONS


Brand: Stoptech
Boiling Dry Point: 622°F
Boiling Wet Point: 404°F
Color: Not supplied
DOT Rating: Dot 4
Type: Synthetic
Volume: 500ml
Add to Cart
$27.99
VALVOLINE® FULL SYNTHETIC WITH MAXLIFE TECHNOLOGY SAE 5W30 MOTOR OIL (VV179)

Product Information

  • Oil Composition:  Synthetic
  • Viscosity Grade:  5W-30
  • Volume (Qt):  1 Quart

Applications for your Vehicles

  • This product is universal and applies to all vehicles.
  • Detailed Description

    SAE 5W-30; Full Synthetic; High Mileage; 1 Quart


Every Engine Should Run Like New

From the first use, Valvoline Full Synthetic with MaxLife Technology (FSwMT) provides your car’s engine our maximum protection against heat, deposits and wear. Formulated with more anti wear additives that stay in your oil longer, FSwMT supplies 40% more anti-wear film than Mobil 1*. FSwMT is specially formulated to meet the needs of vehicles as they age past 75,000 miles. It’s advanced formula can also be used in newer cars to help prevent the causes of engine breakdown before they begin. Valvoline Full Synthetic with MaxLife Technology is our ultimate level of protection helping your engine run like new longer.

*Based on anti-wear film generated in Cameron Plint Test, Valvoline Full Synthetic with MaxLife Technology 5W-30 vs Mobil 1 5W-30

Add to Cart
$9.99
$16.93
Whiteline Front Camber Adjusting Bolt Kit - 14mm (Multiple Fitments) ( KCA414)
Product Description

Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 1.75 deg. Unlike other friction lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Install guide
Z201A.pdf (124.00 KB)
Installation Instructions (124.00 KB)
Add to Cart
$35.82
$39.80
Per Page      1 - 19 of 19